Skip to main content

I don't really like my Beta52a that much. I've tried every last bass drum...tuned, un-tuned, DW, Tama, Pearl. everything I can get my hands on and I can't get a decent kick drum sound coming into the board. My room live room and control room are both decent, my monitors are good, I think I can finally blame it on the mic or the pre's. Everything other than my kicks sound at least decent.

Should I sell my Beta52 for an Audix D6 or an AKG D112? I don't have any experience with either mic.

Comments

Davedog Wed, 12/08/2004 - 11:44

I use my D4 on a LOT of things.Its just a great little mic....I like it right on the beater head in a kick for my klick and an ATM25 out in front at the blast hole for the whoomp...adjust to taste.I also use it on the low toms when I'm using the ATM25 by itself...which is ALSO a killer kick drum mic.

anonymous Wed, 12/08/2004 - 19:06

strange but all the drumers i've worked with like better the sound of the beta52 than the d-112 but i haven't tried the d6.

on the d-112 i can get good kick sounds but i have to eq alot, with th beta52 don't need to eq that much.

also i use an api 512c mic pre, which i consider excellent for rock drum sounds + more.

on the d-112, someone told me you can remove the "foam" from the mic's inside and that will give a more "airy" sound, I haven't tried it.

bobbo Sun, 12/12/2004 - 13:03

Re:d6

I have used the d6 for over 2 years for metal music, and as long as you compress the kick a little before after tracking, you should get a nice kick drum sound, and if you are trying to get a "as i lay dieing" kick drum sound then i suggest lots of compression and lots of eq to give it that "triggered" drum sound. You could also probably put a mic on the beater side of the head too if possible. I have never tried that though so i don't know how well it would sound or how much snare bleed you would get.

bobbo

sheet Mon, 12/13/2004 - 07:32

Live? D6, Recording, neither. I really do not like the beta52 either. It is kind of blah sounding to me.

Get the Beta 91 pillow mic. It takes two mics to get what this one gives. You get all of the high-end attack that you could ever want, and all of the shell reconance.

The D6 is boosted drastically to the point that it is a one-trick pony. EQ really won't do much for ya. For live use it is great.

I would also consider the Audio Technica ATM25. I have used them live, and some big name engineers use them to record with as well.

sheet Mon, 12/13/2004 - 07:41

This is what I do for metal. Track one, Beta 52 at shell hole, Track 2 Beta 91 on pillow. Track high passed around 3kHz. Track 2 low passed around 75Hz. I get the attack and the resonance and no garbage in between, In the mix it sits very well. I almost always use no eq and I tweek by adjusting the mix between the tracks and the pass filters.