The L2 will help a little bit in retaining the relationship between elements in the mix but it's just 1 component in the chain of many. Don't forget your monitors, the red headed step child of audio. Really good A/D converters, compressor, eq, cables, monitors, room, all add up.

Originally posted by Michael Fossenkemper:
Really good A/D converters.

Do you mean for the recording or for the matering?

I go DAT = TC + L2 = Protools

a lot of guys use a combination of analog and digital gear during mastering. If your not using analog gear, then an A/D converter is not going to be a big part of your chain.

I'd like to know how your using the TC. If you are lossing the drums it sounds like you are over compressing. At what point do you notice the distortion? Turn things off 1 by 1 in the Finalizer to see what is causing it. Are you using the limiter with the compressor?

I'd like to know how your using the TC. If you are lossing the drums it sounds like you are over compressing. At what point do you notice the distortion? Turn things off 1 by 1 in the Finalizer to see what is causing it. Are you using the limiter with the compressor?

Originally posted by Joe Lambert:
Are you using the limiter with the compressor?

The most of the time no. The problem isbthat there's no funktion to make the file louder like with a plug in.
Ok there's the normalizer but it doesn't make it better at all. I don't think that I overcompress it.
I tested really alot but every help is wellcome of course.
Thank you

I used to use a Finalizer96k, and now I'm using the Waves Masters bundle, including the L2.

With the Finalizer, there is a page where you can see the levels of the signal as it passes through each stage, ie: EQ, Normalizer, Comp, Lim. Check there to see where the distortion is occuring, and adjust your levels accordingly. Maybe it's too hot coming in, so reduce the source level.

If you don't want to use Normalize to increase the level, try using the make up gain on the Comp.

If it's still distorting, you may have a faulty unit.

Ron...

Originally posted by Macaroni:
I used to use a Finalizer96k, and now I'm using the Waves Masters bundle, including the L2.

With the Finalizer, there is a page where you can see the levels of the signal as it passes through each stage, ie: EQ, Normalizer, Comp, Lim. Check there to see where the distortion is occuring, and adjust your levels accordingly. Maybe it's too hot coming in, so reduce the source level.

If you don't want to use Normalize to increase the level, try using the make up gain on the Comp.

If it's still distorting, you may have a faulty unit.

Ron...

Thanks Ron

I think that the output of the finalizer is too hot. I know that the Normalizer makes the distortion or sometimes the DRG.
I came later to the same Idea to make up the Gain with the Comp.
The Unit must be ok cause there were 2 guys of TC in my studio and took it together with them to check it.

If you believe it or not the one of them could't even hear the problem. The other guy saved me cause he realized it too.

The problem with the Finalizer is that there's no funktion to make loud like the L-2.

I think that using both of them will be cool. Wish me luck :)