Skip to main content

Hi, I'm Jonathan. I've been reading through the many posts regarding patchbay's, however I've not found the answer's I think I need.

I'm wanting to integrate a Ferrofish Pulse 16 AD/DA converter to a new patchbay in my rack pictured above. The interface I'm using is the USB Digiface.

I'm not a professional musician, I'm a hobbiest with a hybrid setup. I want the best configuration for my needs and would highly encourage any ideas from others more knowledgeable in this area than me.

I play live, jam, and have been recording to the DAW through Direct Outs of Mix wizard 16:2 mixer to the inputs on the Ferrofish.

I've got the line outs of the mixer going to a patchbay for my synths/drum machines.

I have a rack of EFX and Series 500 rack connected to another patchbay.

How would I best intergate the Ferrofish Pulse 16 with a patchbay. I'd like to have easy access to my Series 500 Pre's, EQ, Compressors.

Drawings have been made. I don't have them finished because I don't know what I'm doing at this point. The migration of the Direct Outs from the Ferrofish to a patchbay.

I look forward to reading the helpful responses. Please let me know if I'm missing any need info.




Boswell Wed, 04/10/2024 - 05:43

It's not clear from your post, but are you wanting anything more than access to the analogue I/O of the Pulse16 from the front of the rack?

It looks from your photo as if you have two patchbays that are already wired in. What make and model are they?


User login