Hello All,

I am new to the forums so hi!

@Brien Holcombe, kmetal Boswell, pcrecord, audiokid , ... and anyone else who may be interested:
-

@Brien Holcombe

Brien - using Bob Gold's calculator, how do I calculate a room of varying widths?

I'll be more specific ... I'm looking at moving into another area of my house - it's a Living Room area - where in half of the section, a staircase cuts into the width by 3 ft.

Hy everyone,
I recently bought Owens Corning oc703 acoustical panels (18 panels).
And i dont know how to make the panels (with wood frame or without), to cut them in half and put in the corners or just put them without cutting in the middle, where exactly to put them etc...
And also i bought burlap fabric which i heard is good for this type of panels.

My new small home studio.

This story is crazy and long, so I'm going to summarize it. Seven years ago I was able to recover some Owens Corning 703 from four cubicle walls that were stashed in a basement at an old factory job. OC-703 is the bomb for broadband absorbers, as we all know, so you know I was thrilled when my boss said I could have them.

We're planning on building a house with a basement, to include a music room. I can’t "build a studio" as such, just hope to optimize construction for better isolation than what a basement would normally have. I won't be building a room within a room or anything that involved. I plan to present the builder with options for them to assess for cost and practicality. The diagram on p.

What would you consider an ideal size for a one-room studio that would accommodate a band rehearsal setup, recording/mixing station, and extra amp stacks, guitar rack, etc.?

I recently replaced the acoustic treatment with some new acoustic tiles in my home soundroom.
These are strategically placed such as first points of reflection, etc also four centred on the main oposing wall followed by a line either side along the centre at evenly spaced intervals, also some corner bass traps.