Im going to take my first stab at recording vocals and I've gone through all the tips and stuff which were great but I was wondering how you guys would go about using this stuff, Im going for clean but hard rock vocals. Here's some sample music Ill be recording vocals for:
myspace.com/massiveco
Anybody own one? What are your thoughts? Applications?
Hi all
Seems like I get myself in the same problem over and over again lately. How do I get the drum OH's to have some life without them sounding like an 1/8" drill bit in the ear drums. This is how I've been recording them lately
HI, I own a At2020 and Just purchased a CAD trion 8000.
Hi all! I was wondering if anyone's used the AT2020 to mic a snare...specifically, side-Micing the shell. The mic has pretty high SPL rating, but is there a chance of damaging it this way? Its only $90 or so, but its still a good mic, so I'd hate to ruin one! Thanks for any advice! Andy
Some one mentioned something about opening up an at2020 and removing the foam from the element. How do you open it up and reseal it. Also, does any one have and pictures?
Recently we have had rediculous amounts of rain and humidity in my town, i have a home studio/practice space in my basement which tends to get a little humid unfortunately. last week my friend and I sat down to do some acoustic recording. i put the at2020 in front his guitar. when i turned on my Behringer mixer all i got from the mic was hiss.
Hey guys, first post :)
I need some help choosing a CHEAP audio interface.
Basically so far I am getting an AT2020 to record Acoustic and then Vocals (this is all that I'll be recording).
I have about another AU$150 (about US$115) to spend on a cheap interface.. Are there any worth the money around this amount or should I hold off?
I bought a pair of these from an ebay store a few weeks back and finally have had a chance to use them on a few different things:
1. Drum OH's. .they did fine, not overly hyped in the high-end . In fact, they're rather flat except in the low end, where they start to roll off at about 80 Hz, which IMO is fine for OH's, I don't want too much low end info here.
Anyone have an opportunity to A/B these mics?
