buzzing

Hey,

I hope this is the right place to ask this question..

so I got a new Motu M2 Interface about a month ago. Since then there are periodic buzzing sounds coming from the Headphone Amps at "random" times. Sometimes it runs 3 hours without a Problem and sometimes the buzzing happens twice in 5 minutes. Turning the Interface off and on again "fixes" the buzzing temporarily.

Hi, I have a new microphone and it has a electrical buzzing sound when i try to record using it. It is not the soft buzzing sound that can be removed, after searching up about it i realised that it should be the cause of ground loop. So i decided to buy a ground loop insolator for the problem but it still doesnt help. Does anyone have any experience or any idea to solve this?

Hi,

I have a pair of KRK Rokit RP5 G2 monitors but on one of them when you only turn on the power it makes a horrible loud buzzing sound:

VIDEO: https://sendvid.com/rsojf518

hi there
i have a samson resolva8 monitors that are connected to my PreSonus sound card and when i plug the cable to my right monitor i have a buzzing sound the monitor is working and i get signal what shall i do buy some professional mogami monitor cables? is the problem from the cable or from my monitor?
thanks
Niv

I live in an apartment so Micing an amp isn't really an option. I got myself a Voice Tonelab ST which I really like and with my new Fender Strat I quite like some of the tones I'm getting out of pairing them together.

HI,

The Setup:
I am using a laptop for my DAW/Sound output to my Headphone distribution amp. The laptop output is a headphone output not a line-out output. My Headphone amp has a 1/4 stereo direct input and the laptop has a 1/8 output. I use a 1/8 to 1/8 cable with a 1/8 to 1/4 stereo to stereo adapter.

I have a Mackie mixer (profx12) and I have 4 QSC K12 speakers. I use these at my temple as our sound system. I have the mixer in the sound booth and the speakers outside the sound booth. I am running two XLR cables out of the booth from the mixer to the speakers. I use one XLR cable for two speakers.

Hi
Did a live recording recently of a friend playing acoustic guitar in a club. Was able to get a clean feed off the PA into my ZOOMH4N.

Can anyone suggest some best practices when working with acoustic guitar in Audition or similar DAW?
What compression, equalization should I use?
How can I reduce some of the harshness and 'buzzing' sounds the strings make?

I have a Sears (yeah I know) LXI series stereo (from yesteryear).

Can I hook it up to my active monitors?

They are BehgE*Yspo87w3y Truth 2031A's.

I hooked up the rca stereo out into the 1/4 inch.

Mega BUZZ/HUMMING!

Any solutions or finalities?

Thanks!