Hello there,
I had a doubt this morning, the maximum peak advised -3dB to mastering then nothing inserted in the master bus, also applies in mastering post EQ? In this case only a high-pass active filter of 30Hz.
Thank you,
Best,
MATTEO CANDURA
With the possible exception of Pro Tools (maybe not now that its gone native?) all modern DAWs use floating point math internally. What this means is, when the signal exceeds full scale it doesn't actually clip: instead the decimal point simply floats along a step, and the mix bus suddenly has room to accommodate it.
Can anybody example the concept of headroom and give any suggestions on to gaining some more headroom with my tracking chain?
My chain is:
RODE NT1000 --> PreSonus TubePRE --> dbx 266XL --> Mbox 2 --> Pro Tools LE (Windows Vista/ 2GB RAM)
Someone said that I was having some tracking issues and the lack of headroom was one of the issues.
Hi there and thanks.
I am mixing in Cubase 5 and my rule of thumb was to never take the individual or group tracks above 0 even though the channel faders go to 6. The master fader I'd always have down at -5 to -10.
My m-powered Pro Tools has 12db before clipping on the faders, i know the HD version has like 20db or so. What does logic have?
The difference expressed in dB between the nominal operating level of a device, and the maximum level that can pass through the device without being distorted.
or
The distance (in decibels) between the nominal level of a piece of audio equipment ("0" on the meter) and the clipping level, at which point it distorts.
Reasonably new to this. This question arises from my search for a new/new-to-me preamp to replace my mobilePre
(which, not surprisingly, doesn't provide tracks which stack particularly quietly).
I believe that I understand the concept of headroom (i.e. - how hot a (mic) signal can the preamp handle?),
but not the measurement units.
Hi, I've been reading quite a few of the threads on this forum regarding mixing, mastering etc.
Most of the threads start out with a nice question and end up in some discussion about how professional recordings are not made by accident etc, etc.
This makes them hard to read, and even herder to learn anything.
Wasn't sure where to post this since it's digital audio. But I'm wondering if there are any industry standards with regard to levels when recording.
I'm running a Mackie 1220 with Firewire interface and using the included Tracktion software on a Windows XP machine. My microphones (don't laugh) are a couple MXL's (the $100 combo pack).
Hello. Currently have an ART TubePac-decent, but need more headroom. FMR RNP looks interesting. (and the price range) Any opinion, and or direction would help. Thank, Barefoot. (currently recording mostly Female Vox.)
