hi everyone, i have an isp decimator g pro rack guitar version, for my marshall 9200, jmp1, jfx 1 configuration i would need the stereo mod version, i tried to look for used ones, but i couldn't find any. Opening the frame of my decimator I noticed that there is the possibility to convert it from guitar to stereo and vice versa.
Hi gang,
Here's a video in which I mod the MXL 990 with a new Capsule ! (RK47 from microphone-parts.com)
Tell me what you think
http://tapeop.com/t…
Has anyone tried this mod?
I have a pair of MXL V67N Mics and I like them. .but not enough to leave them alone :) . I opened one up:
-The electronics are mostly surface components
- There is a transformer (of course)
- the Capacitor off the capsule looks good
- A "larger" electrolytic capacitor; a 47uf 100v nichicon
i have three choices
i need a new vocal mic
just all around vocal mic, form a to z
my choices are:
1. mod my r77 that i already have
2. get a sm7b
3. or get a cad e100s
I am posting this for those of us here who are fans of fuzz, Muff, and/or doom metal guitar sounds. I myself love fuzz, but I've always found the new Big Muffs to be a bit weak sounding to say the least. I have grown fond of modifying them back closer to a more 'vintage' Big Muff style sound, while putting my own spin on it.
Hey, I finally decided to do some mods to my Apex 460, and after looking through the hundreds of forums with the Apex 460 mods, I still have some questions. I'm pretty new to mic modding, so some questions might be on the stupider side, but please help if you can.
I have an older VMP-4000e with the -30db pad switch. I notice the newer ones have a -25db value on the pad switch. What do I need to do (component swap) to change my pad value to the newer -25db spec. I have major soldering skills.
DAvid Blackmon
I've been looking into one of these kits...
(Dead Link Removed)
The shell sizes are just what I'm looking for, and the price is right. Mainly, this kit would be for club gigs and occasional recording. Anyone have a story to tell about these drums? ANDY
I had the hardest time finding a vert bar to suit my needs with my LDCs, having enough clearance between the two mounting posts to run them head to head. .Below is a modification to the Shure a27m vert bar that will allow plenty of clearance.
you need the Shure a27m vert bar.
