phantom power problems

Hello guys and girls,

First time I have tried to turn on phantom power on this recorder - going to the menu and input, I get the option for +48V or +24V. Selecting 48 causes the thing to shut down. Any idea what is going on?



Theis is without anything plugged in at all.

Paul

I own an Audiobox Studio, I mainly record vocals on it. Yesterday I was recording some vocals and everything worked great, but today when I was going to add a couple more takes, when I turned the phantom power on (48V button) it started making all types of weird noises, kind of as if wind was "hitting" the mic.

i have a AKG c3000b condensor mic, a roland jx 305 groovesynth keyboard and a drum machine all connected to a Behringer eurodesk all running into Cubase sx, everything works fine and have been able to make some good recordings over the years, i wanted to record a jam the other day with guitar, bass etc but realsied when phantom power is switched on to enable to mic to work as well, the keyboar

Recording bass guitar at a concert the other day, the bass player’s amplifier gave off a suspicious whine when the bass was plugged into my Whirlwind IMP-2 passive direct box. The ground lift switch on the DI did not get rid of the noise. I suspect that my DI is not blocking the phantom power that my PreSonus Firepod is sending down the line.

I reccently rented a splitter snake from a local music store to do some live recording of a band. For some reason, I wasn't getting any phantom power at either end of the snake (split or main trunk). Is there something special required in a splitter snake to get phantom power to the business end ?

Hi!

I have a question:

I have this Mackie SR24.4 that I use in my project studio. I like it for all my hardware synths and DAW-outs. but I need better pre's for recording with mics.

So I'm thinking about getting the FMR-RNP or the Summit Audio 2BA-221. They both seems like a good choice for under 600 USD.

I happened to noitce in the middle of a session that my (phantom powered) B.L.U.E. mouse mic was not working (barely passing signal) when plugged into my VINTECH 1272 preamp. Oddly enough, it seems to work fine on other preamps, (TubeTech, Daking, etc). And also, oddly, other phantom mics like a TLM 103 continue to work fine on the Vintech.