shotgun

I've been testing some shotgun mics and investigating how the length impacts on their polar patterns at different frequencies. Some rotation of multiple mics, measurements and graphs!

I read something today in the old products section of the AKG website on the old CK-8 capsule for the 451 preamp. I knew I had one of these inside a zepplin windshield in the store, but hadn't done anything much with it since I had other shotguns. What made me think was that AKG noted it's use on hand held vocals, where it was good at reducing popping.

So I am fairly new to folly audio recording. I was looking around youtube for how folly artist (from a beginner standpoint) typically would go about getting into folly sound production. One video recommended that I could start with a mid side audio setup for doing stereo and mono sound and recording it into a zoom H4N. So is that what you guys would suggest?

I've been asked to record a guy in a living room playing guitar and singing. I first thought to have a cardioid for the singer and the shotgun for the guitar so I can get better signals from each source.

Since there aren't any stores (at least near me) where you can walk in and test a bunch of shotgun mics I was wondering a person decides on which one to buy. Reading reviews and watching You Tube videos is one thing but to really hear how it works you have to be there. If I'm going to spend $300 on a mic I want to hear it first, probably on some of my gear.

Hey everyone,

So I recently ran into a serious issue while on a location shoot.

I've never had any signal issues with any of my mics before, but for some reason, I've been getting a strange, periodic popping sound on my ME66. I have it plugged into channel one of my Tascam DR-680 and the other channels are usually taken up by my Sennheiser G3s.

I'm told by the Sennheiser distributor there are currently no stocks of 416 windsocks. RODE 's WSVM accessory windsock, compatible with the NTG1 & 2 and Videomic according to their website, looks like it might fit. However they don't seem to sell one compatible with the NTG3 which I gather is their direct competition to the 416.

Hi i was loaned out a Sennheiser ME66 Shotgun mic from my work. The mic was working fine until the mic stopped picking up audio normally. We checked the XLR and the camera and another shotgun mic and the ME66 was the problem. You can hear someone if they talk into the front of the mic but it sounds like a whisper.

Hi
I have an M66 that has become noisy / low output, the pre-amp seems ok by substituting with another powering module. Has anybody taken the mic electret insert out and can tell me how to do it.
Regards
Andy

Hello everyone, this is my first post here on recording.org, so a very happy hello from me! :) I've been a lurker on the site occasionally, but now I have something to share so I thought I'd register at last! diddlydoo (lol, that's the funniest emoticon I've ever seen)