I thought I’d share this because I’m pretty pleased with what I have done. Pre-covid we recorded a show in a theatre and ended up with a hard drive full of the video clips from cameras and the sound files recorded from the M32 to a MacBook.
Hello,
Is there anyway I could synchronize Tascam HS-P82 with Sound Devices Mixpre-6 during recording, so that the audio tracks would be in sync for mixing.
I have never worked with syncing, so my question may be naive, but maybe somebody has some actual experience and could share his/her knowledge.
Thanks anyway...
I would like to synchronize the parameters of both Samplitude (VU) and the AM | Munition, in order to make both have the same measurement on the same real time.
I tried to change the decay time and peak hold (AM), but the graphics do not reflect the same reading of the audio at runtime.
I would like to analyze analog circuits by sending a stimulus through it and then recording the output, changing the circuit slightly and then running the test again to produce two *almost* identical .wav files that can then be compared sample-for-sample.
Hi, this is my first post. I've been lurking on here for years and soaking up a ton of great info, so a big thanks to all the contributors! Now to my question...
Has anyone ever run into this problem?...
You have a full mix and you need to remove one track?
You have the separate track, but the files need to be perfectly synchronized.
I have run into this problem so many times.
So my question is 2-fold:
Hi,
I am going to start off by saying I am a pHD student in evolutionary biology, so my knowledge of acoustics and what not are minimal at this point. I am enrolled in an engineering noise control class this semester to fix that.
I keep hearing about word clocks and how the RME products have such good ones. I basically understand that a good sync helps sound but basically nothing else. I have a Firestudio Mobile and am running Cubase SX3. Right now the synchronization setup is set to internal timecode and this is the only way I've ever recorded.
Hello everybody
I use a Roland VS 2400 CD in master and the logic express as slave. I used the fonction " synchronisation track" from the vs 2400 as synchronisation solution.
What is it used for?
(I got it along with a Lexicon 2400 (used package deal)).
It seems to have 2 sets of AES/EBU in/outs.
thanks,
=RR=
