Hi Steve ,

You may want to contact Tube Tech directly as they are quite friendly regarding their service manuals ......

At least from my past experience with them ..

I have a couple of their schematics but unfortunately not the one you look for..

Luis

I'm sure that John Klett posted something about the LCA-2B on his forum recently... -Something about how how hates to work on them, IIRC... :(

-Run a search for "calibrate", "calibration" and LCA-2B in John Klett's forum over at pro sound web dot com and see if you turn anything up...

Keith

I am in for USD$5

Hey, don't pay him NOTHING! I've always just found a schematic he doesn't have and then traded. Maybe two for that, don't know. But I'm sure someone here has something kewl he doesn't have. Just ask him first before sending the schematics.

Jaakko

Hi Luis,
Do you know what value r16 resistor associated with the pilot lamp on the Tube Tech PE1C might be or do you have a parts list? The resistor is so badly burnt I can't determine it's color bands and need to replace.
Thanks,
Frank

Hi Frank,

Did you mean to post this message to Luis here at Recording.Org? It's possible one of our members has a set of PE1C schematics and can come back in with a resistor value for you, but I think you would be better served by asking Tube Tech directly.