Hi everyone
I've got the AKG k240 headphones, which I love. After 1-2 years of using them, I noticed that its left side stops working.
I must shift around the wires on top to get the left side to work again. But as I slightly move, the left side goes off again >.>
Edit: I attached an image (that is now dead) which had the part I am referring that I have to move to make it work. It's not the cable that's damaged, I already tested that.
ANY ADVICE?
Comments
well something is shorting somewhere. Have you checked the poin
well something is shorting somewhere. Have you checked the point where the cable meets the HP speaker?
K240's are pretty notorious for this.
best bet is to send them to akg for repair. or get a new set. th
best bet is to send them to akg for repair. or get a new set. this is why one should handle hps with care ... it used to drive me nuts when i would put ot 100 dollar headsets all around for a tracking session and the musicians would rip them off with one hand and toss them on the floor ... when that happens i would quietly go out to the live room and replace the $!00 sonys with some $15 cheapos i would buy at R/S ..
As I recall, the wiring on the 240's was ridiculously thin on th
As I recall, the wiring on the 240's was ridiculously thin on the ear to ear speaker contacts - I've fixed a few of them in the past...and it can be done, but it wasn't easy.