Hello Everyone.
I am based in Surrey and I am looking for a reliable and hopefully reasonably prices professional audio equipment technician.
Any recommendations are appreciated.
Many Thanks,
Gary
This one came in from my luthier friend.
Halcyon Guitars http://www.halcyong…
If you don't know about Ed, you should ;)
Anyway, the power jack was loose and not making connection. Once I got the connection PCB out, I found the trace on the board had been pulled off the board.
This one is now on the desk. The unit is pretty good shape, others some minor signs of liquid "ingestion" on the top panel. The unit looks stock, and I can see a few bubbled electrolytic in there.
All and all a nice build, with tiny input transformers on the 6 mic/line ins, and two output transformers on the XLR outs.
Hi all,
I'm repairing a couple of 7602 MkIIs, each with their own problems. Does anyone have experience with those or maybe even have access to a schematic or service manual? I have looked at some Neve 1073 schematics, since it's supposed to be a clone of those, but there seem to be enough differences outside of the tone circuitry that they're not terribly helpful.
Hi, my left stereo channel of the Zoom H6 capsule started with buzz sounds than it got worse with a hiss sound, then I opened it and realized that the cables was detached like in this picture I took today when I disassembled it.
can you tell me how to solder it please? If you can draw on the picture where to exactly solder the 2 cables I would be really grateful
thx a lot
I have now repaired and Modded 4 LA4's for the same customer. VU repairs, matching the LDR's for stereo pairs, new opamps, recapping and general clean and lubing of the pots.
Hi
I just bought a pair of KEf 105.3's for a song. the reason is the 2 visible lf drivers need their surrounds replaced as they are non existent. I assume the top LF drivers need repair too.
Hi Folks,
Any advice would be much appreciated.
Have had a pair of KRK rp5 (gen 2) for some years and been very happy with them
One recently failed (bass speaker not working). I am trying to decide whether to send for repair (out of warranty) which will cost £30 carriage there and back, £20 initial fee discounted from repair cost when done or the following options
Hi everyone
I've got the AKG k240 headphones, which I love. After 1-2 years of using them, I noticed that its left side stops working.
I must shift around the wires on top to get the left side to work again. But as I slightly move, the left side goes off again >.>
Our non profit organization has 2 Elvis 12A powered speakers and a Mixer Tapco Catalina series C12 Master that have been damaged due being plugged into a outlet with reversed wires. the speakers work partially it seems that just the 1/4" socket is damaged but the three prong socket still works. The mixer seems to have damage on two mother boards.
We are located near scranton PA.
