I've been recording using my PreSonus FP-10 for a while now and recently I got a Samson S com4 compressor for my live stuff. Tonight I decided I wanted to record some vocals and use the Samson for some soft compression going into my FP-10. When I started hooking everything up I realized the Samson doesn't have Phantom power for my condenser.
Do I need to use a Preamp with Phantom power before the Compressor, or is there something else I need?
I've got an ART Pre I could use for that, but I guess I was curious what "should" be done in this situation. Or do I need to go another route all together?
Comments
You should connect your mic to the FP10 channel 1 or 2 pre-amps,
You should connect your mic to the FP10 channel 1 or 2 pre-amps, and then make use of the insert send/return facility for connecting the compressor.
See [[url=http://[/URL]="http://www.presonus…"]this[/]="http://www.presonus…"]this[/] graphic from Presonus.
Ok...Sorry for the Lame Post. Next time I will do a little more
Ok...Sorry for the Lame Post. Next time I will do a little more research before I post a question. A quick search online I found Phantom power supplies.