I am going to record a classical choir and I need some advise
The location is a medium sized (old) church. Carpet on the floors and walls of wood. The ceiling high is aprox 10-12 meters. The natural reverberation of the church is pretty good. (Not the 5 second reverbs u get in big stonechurches but not completely dead either, something in between)
The choir consist of aprox 20-25 people. No band. (I guess it will be two rows of 12-13)
I`ve managed to borrow some great gear to do this recording.
What I`ve got available:
2 x DPA 4011 (sdc)
3 x Milab WM44 (sdc)
2 x Soundelux U195
1 x Neumann U149
Great River 2nv
Api 3124
Thermionic Earlybird 1,2 (2 chn valvepre)
TL Audio 5001 (4chn valvepre)
UA 2-1176
Since I have little/no experience with recording choirs I was hoping to get some tips on micplacement, how many mics etc...
Comments
how I do I will use the DPA's but not 2 . I think 4 Mics are be
how I do
I will use the DPA's but not 2 . I think 4 Mics are better for this Choir size
What I do is a Pair of this Mics as a A/B or ORTF Combination in the middle and a little bit more higher. 2 Mics I will take it to both side and the End of the Choir to make it a little bit more wider . . .
And than I will use the 4 Ch. Pre.
When the Church sounding good, take another 2 Mics for the room perhaps you can use it on the mix.
Sorry for the " bad " english but I'm german :-)