x
microphonen00b 13 August 2011

Hey forum!
So I just scored a Tascam FW-1804, AND a Behringer MIC2200 preamp, all for $200. I think I got a pretty good deal.
Anyway, I was wondering exactly how I go about connecting my preamp to my interface. The Tascam only has 4 mic inputs, and the Behringer is supposed to add another two, but I don't see how that is done...the back of it only has two line-ins, two line-outs, two mic inputs, and two mic outputs. The only ways I can think of don't make sense...and other than those, I don't really see and outputs.
Anyway, any help is much much appreciated :)

Thanks

Comments

Boswell Mon, 08/15/2011 - 03:22

microphonen00b, post: 375100 wrote: Hey forum!
So I just scored a Tascam FW-1804, AND a Behringer MIC2200 preamp, all for $200. I think I got a pretty good deal.

Yes, you did. The only better deal I could think of would have been to get the FW-1804 on its own for $200.

microphonen00b, post: 375100 wrote: Anyway, I was wondering exactly how I go about connecting my preamp to my interface. The Tascam only has 4 mic inputs, and the Behringer is supposed to add another two, but I don't see how that is done...the back of it only has two line-ins, two line-outs, two mic inputs, and two mic outputs. The only ways I can think of don't make sense...and other than those, I don't really see and outputs.

The MIC2200 has jack and XLR outputs wired in parallel. Use a pair of TRS jack cables to connect the jack outputs of the MIC2200 to two of the line input jacks of the FW-1804.

x

User login