I seem to recall a thread a while back where somebody heard rumors that the P4 2.4B Northwood (533FSB) might support hyperthreading. For some reason I can't find the thread. Anybody know if this rumor is true? Thanks!
Well, you need a BIOS hack to do this and it's not easy...so in the long run. No. Believe me...I was hoping that it would be easy. I'll go check out the VR Forums to see what the status is of the attempts. Haven't been there in a bit since I found out from my good source that it can't happen unless you know BIOS engineering and software writing.
Well sounds like it's not for me. I'm going to order the chip today anyway with the P4PE mobo. Can upgrade the chip at a later date when those ridiculous prices come down!
I'm finally joining the club! My AMD machine is being retired to home use!!!
i just built a box for a friend very similar to your specs. your gonna love it. i don't know if you are going to need the extra cooling though. this is one of those wwod (what would opus do) moments. good luck.
Do you mean the chipset cooler? If I don't need it great, less noise. I'm going with the Zalman because it is reportedly quiet and very effective. Whadda ya think Opus? Fan for the Northbridge or not?
No, no chipset cooler is needed. If you want a cooling system for it go for the water cooled systems as that is completely noiseless. To be honest the stock fan is fine for the Intel CPU's. If you plan on doing some serious overclocking than you would want serious cooling. Stick with the default values and you're all set to go. I've done extensive Sandra burn in tests with the stock fan and an enermax PSU and the board did not get that hot at all!
Hyperthreading is a myth. In digital audio work it will actually slow down your processor's speed. Don't hack your bios or waste ur time for a 10% constant neg/pos swing
Whether it's a myth or not I do not know, (or care at this point) I've been using this new machine for a few weeks now and it screams. The performance exceeds my current needs! Have not loaded it down heavily with VSTI's yet, but I know it will do a lot better than my old 1.1G Athlon.
Hyper threading is not a myth. Only the xeon processors with HT will slow you down. The P4's(Northwoods) are happily cruising along. The problem,"if" there was a problem, would be that there is no software to truly take advantage of it yet. In all actuality most DAW software IS multi-processor friendly so you won't lose any performance. If you read the specs on hyper threading and read some pretty informative articles(such as the latest issue of CPU) you would find that it's actually a good thing.
I do agree about hacking the BIOS as that's not easy in any way..nor would I recommend it.
If you're going to post why something is bad...provide us with information please. M'kay
Comments
Well, you need a BIOS hack to do this and it's not easy...so in
Well, you need a BIOS hack to do this and it's not easy...so in the long run. No. Believe me...I was hoping that it would be easy. I'll go check out the VR Forums to see what the status is of the attempts. Haven't been there in a bit since I found out from my good source that it can't happen unless you know BIOS engineering and software writing.
Opus
Well sounds like it's not for me. I'm going to order the chip t
Well sounds like it's not for me. I'm going to order the chip today anyway with the P4PE mobo. Can upgrade the chip at a later date when those ridiculous prices come down!
I'm finally joining the club! My AMD machine is being retired to home use!!!
P4B 533MHZ
P4PE/R/L/SATA
512MB Crucial 2700
Matrox G550
Seagate Baracudda IV 40G - OS
120G WD 8mb Cache - audio
Enermax 350 whisper P/S
Zalman "flower" heat sink/fan
Vantec Iceberg CCB-A1A chipset cooling kit
i just built a box for a friend very similar to your specs. your
i just built a box for a friend very similar to your specs. your gonna love it. i don't know if you are going to need the extra cooling though. this is one of those wwod (what would opus do) moments. good luck.
Do you mean the chipset cooler? If I don't need it great, less
Do you mean the chipset cooler? If I don't need it great, less noise. I'm going with the Zalman because it is reportedly quiet and very effective. Whadda ya think Opus? Fan for the Northbridge or not?
No, no chipset cooler is needed. If you want a cooling system fo
No, no chipset cooler is needed. If you want a cooling system for it go for the water cooled systems as that is completely noiseless. To be honest the stock fan is fine for the Intel CPU's. If you plan on doing some serious overclocking than you would want serious cooling. Stick with the default values and you're all set to go. I've done extensive Sandra burn in tests with the stock fan and an enermax PSU and the board did not get that hot at all!
Cheers
Opus
Cool! :) I'll put the fan on my AMD machine which has a shitty
Cool! :) I'll put the fan on my AMD machine which has a shitty fan at the moment. it's overclocked and needs to stay cooool!
Yes. AMD MUST have a good cooling system as those CPU's do run e
Yes. AMD MUST have a good cooling system as those CPU's do run extremely hot!
As Always...Cheers!
Opus :c:
Hyperthreading is a myth. In digital audio work it will actuall
Hyperthreading is a myth. In digital audio work it will actually slow down your processor's speed. Don't hack your bios or waste ur time for a 10% constant neg/pos swing
Whether it's a myth or not I do not know, (or care at this point
Whether it's a myth or not I do not know, (or care at this point) I've been using this new machine for a few weeks now and it screams. The performance exceeds my current needs! Have not loaded it down heavily with VSTI's yet, but I know it will do a lot better than my old 1.1G Athlon.
jmoro Hyper threading is not a myth. Only the xeon processors w
jmoro
Hyper threading is not a myth. Only the xeon processors with HT will slow you down. The P4's(Northwoods) are happily cruising along. The problem,"if" there was a problem, would be that there is no software to truly take advantage of it yet. In all actuality most DAW software IS multi-processor friendly so you won't lose any performance. If you read the specs on hyper threading and read some pretty informative articles(such as the latest issue of CPU) you would find that it's actually a good thing.
I do agree about hacking the BIOS as that's not easy in any way..nor would I recommend it.
If you're going to post why something is bad...provide us with information please. M'kay
Opus :roll: