Skip to main content

to an interface or home record studio?

the cable dont have the rca plugin just a naked cable

i need an adapter rca?

Comments

Boswell Tue, 06/07/2011 - 05:07

You can't use the speaker itself, but you may be able to use the jack socket that you plug your speaker into and take a lead from there into the interface. What is it you plug the speaker into? What do you want to record?

You will have to give us more information about the system. For example, what is the "naked cable"?

jimmys69 Tue, 06/07/2011 - 05:42

I am assuming he means speaker wires. If that is the case you will need to feed an amp or stereo system from your interface, to 'power' the speakers. Depending on the interface, it may be sending more voltage than the consumer grade stereo can handle. Assuming that you want to use cheap speakers as monitors, I would guess that the stereo may not be of high quality either so use at your own risk of damage. An actual power amp will be better suited if you have one around. Otherwise you will be better off just purchasing powered monitors.

I suppose since you mentioned the RCA connectors, that your interface has this type of output and is probably designed for hookup to a stereo receiver. Go that route until you can afford some real monitors.

Good luck! :D

Jimmy

jimmys69 Wed, 06/08/2011 - 04:41

mokko, post: 372407 wrote: what i need to power em?

i need to buy a pro speakers or use computer cheap speakers between the buy?

theres a video or diagram?

you say the speakers need electric power cord?

excuse me by my bad english

Power=amplify. You need something between your interface and those speakers that will amplify the line signal to power the speakers. An amplifier requires electrical current. The speakers do not, well...sort of. That's a detail not to worry about right now.

Interface or computer output>home stereo receiver or amplifier>speakers.