Hello,
we have a problem with the supply of a TUBE-TECH MMC 1A Microphone Amplifier and Multiband Compressor.
The fuse directly blow for the 240V and 270V supply.
Is there anybody who can helps us with the schematics ?
Comments
Indeed, its the high voltage DC. I've contacted Tube-Tech for th
Indeed, its the high voltage DC.
I've contacted Tube-Tech for this, but they do not hand out schematics. They suggest to contact Joystick, but neither they deliver the schematics.
I have replaced Q202 ( BUT11A ) , Q201 ( BUX87 ) and U201 ( LM317T ). Now the fuse don't blow, but TP 201 reads 360V and TP 202 reads 68V.
When I desolder R209, so the line to the AMP section is broken TP202 reads 260V. Difficult to trace the faulty piece without schematics.
I have downloaded the EQ 1A schematics, the supply ( 240v) looks alike but differs.
It's not easy to help you further without more documentation. Ha
It's not easy to help you further without more documentation. Have you tried this guy: "http://members.shaw.ca/vintage1/tube.htm?"]HERE's THE LIST!
I assume you are talking about the d.c. voltages at TP201 (+280V
I assume you are talking about the d.c. voltages at TP201 (+280V nominal) and TP202 (+240V) rather than the a.c. mains input voltages.
I would try contacting Tube-Tech directly in Denmark. I don't know the company (or their products) personally, but from all I've heard, they are a friendly bunch.