fallan
28 October 2014
Hi All,Im a newbie here looks like a great site. Ive got the Tascam DP-24 DAW and have a problem with the mic input. Having plugged it in to the input and shouting into the mic so it doesn't clip for some reason with everything turned off trim channel fader and mains fader if I tap the mic it registers on the channel so any advice why that happens Thanks
Tags
Comments
Boswell, post: 420508, member: 29034 wrote: As pc said, it's lik
Boswell, post: 420508, member: 29034 wrote: As pc said, it's likely that you have that channel soloed. Soloing is designed to show you levels whether the audio is muted or not.
many thanks PC and Boswell now its sorted.its amazing after many years in my home studio I could miss this Cheers to you both
I'm pretty sure it's a routing issue. You see, if you don't mute
I'm pretty sure it's a routing issue.
You see, if you don't mute the channel but put the fader down, if you have a auxiliary send which is pre-fader, it will still be active.
Also, if you solo a channel, the meter usually show the gain stage to help you ajust it without hurting the PA.