anonymous
16 October 2009
Hi. Im thinking to buy Mackie d8b from USA. Reason is simple. Even with shiping cost and taxes its 3 times cheaper.
I just wanna know will electrician or someone be able to make it work on 220V?
Or will something like this do?
http://www.dvdoverseas.com/store/index.html?loadfile=catalog1_0.html
Im very sorry bout my eng.
Thank u
Comments
Slavebell: This was a FAQ I found on the Mackie website which ha
Slavebell:
This was a FAQ I found on the Mackie website which has alot of info on the D8B BTW. I would contact Mackie and make sure you can operate it correctly before buying and shipping...
From Mackie
FAQ Hardware::Console/Power Supply
If I take my D8B overseas (from the US), can I simply switch the CPU power supply from 110 to 240 volts? And, is the D8B auto power sensing?
No - to both questions. In addition to the CPU power supply (mother board) there are other power supply related components (i.e. fuses) inside the D8B CPU enclosure that would need upgrading.
Contact Mackie International Distributors for Service Locations
Note: If you are planning to bring your D8B back to the US, you might consider a step-down power supply. Be sure it is of high quality and can handle the power requirements of the D8B. Some step-down power supplies have been know to be noisy and sometimes fluctuate in power. Be sure to test vigorously. Also, insert a power conditioner between the D8B PS and the step-down unit. (Mackie will not be held responsible for possible damage caused when using the above suggestions.)
For more info regarding D8B power requirements see Mackie Authorized Service Center Locator.