anonymous
13 September 2006
ok...let me try once again
i got the turntable...i got a Firewire solo..and using adobe audition..
Do i need anything else...cause right now all i could do is connect the turntable to the firewire S/PDIF in&out ...
If i dont need anything else...how can i make this work?..
please help..thank you
Tags
Comments
Er, no. S/PDIF is a digital interface standard and you can't co
Er, no.
S/PDIF is a digital interface standard and you can't connect an analog source to it, even if they happen to use the same type of RCA connectors.
Also, the signal from a magnetic cartridge on a turntable needs amplifying and correcting in frequency to get the correct response.
Your best plan is to get a phono pre-amp from Maplins/RadioShack or wherever and plug the output of that into the line inputs of the Solo. The phono pre-amp does the required frequency correction and pre-amplification. You will need a stereo cable to go from the pre-amp outputs (probably RCA jacks) to the Solo line inputs (two 1/4" mono jack plugs).