Skip to main content

Hi guys,

When I burn a CD it won't play on my 1 year old Panasonic car stereo, or my 10 year old boom box. Not a big deal but if I give someone a disc and they can't listen to it I look like a dork.

Would this likely be the burner(came with a new dell 4700) the software(Sonic-Record Now 7.3) or the ultra cheap RW-CD's I bought("natural"-multi speed 48x)

Any thoughts?

Cheers
Keith

Comments

Thomas W. Bethel Sun, 07/17/2005 - 05:52

Keith,

I guess I don't understand why if your are having a problem you don't want to make it go away by purchasing a good CD burner and using premium CDs? If this is a business that you are running then you can chalk this purchase up to the "cost of doing business" if it is a hobby then it is still money well spent. Using a good CD burner and good blank CDs is the start of any good mastering operation and keeping the speed under 4 X is recommended. You have to have a constant and that is well burned CDs. (not to mention a good monitoring system) From your post it seems like you are looking for an answer. When people on this list suggest ways of solving your problem you don't want to take their advice. So what have you really accomplished?

Just MTCW....

anonymous Sun, 07/17/2005 - 13:27

good burner & good discs (i do fine with a sony firewire CRX160E and verbatim super azo discs, but also backup the plextor writers...) , plus low write speeds!! (my experience, thumb of rule is not higher than 4x), that's my experience... and stay away from CD-RWs there are causing major trouble for audio...

anonymous Sun, 07/17/2005 - 15:38

ive found there is a big difference in which disc you use , and how it responds on different players. The apogee cd's (which cost about $1.50 each) seem to be the all around best in my opinion. I only use them when i give a customer a mix of his music. I know which cd's work good in my other players , thats what i use for cheap refrence mixdowns.