newbie pro tools preamp question

mwp 15 February 2006

New to pro tools, I'm using a 002r. I've been recording with analog and ADAT systems for a few years. To get to the point. When I was setting my levels on the kick and snare drum mics using the 002r preamps, they were very hot. Even when the gain was turned down to 0 on the 002r, they were still very hot. I ended up running the mics through an external pre-amp. Is this normal or do I have to back the input faders way down on the 002r to compensate?

Thanks,
MWP

Topic Tags

Comments

To answer a question with a question. What mics are you using??

TVPostSound Wed, 02/15/2006 - 18:08

To answer a question with a question.

What mics are you using???

Beyer on the kick and sm57 on the snare.

mwp Wed, 02/15/2006 - 18:14

Beyer on the kick and sm57 on the snare.

I assume you went in the XLR way, not 1/4". I'm not near one, bu

TVPostSound Wed, 02/15/2006 - 18:20

I assume you went in the XLR way, not 1/4".
I'm not near one, but are there switches on the back, to select -10/+4
they should be +4.

when you start a seesion make sure oyu have the gains as low as

anonymous Wed, 02/15/2006 - 18:46

when you start a seesion make sure oyu have the gains as low as can go i think it is -10 like the other post said, but this in the software not the hardware, not on the back of the 002 only when you start new sessions can you change this

Thanks to everyone for their reply. MWP

mwp Thu, 02/16/2006 - 15:54

Thanks to everyone for their reply.

MWP

Topic Tags

Comments

To answer a question with a question. What mics are you using??

Beyer on the kick and sm57 on the snare.

I assume you went in the XLR way, not 1/4". I'm not near one, bu

when you start a seesion make sure oyu have the gains as low as

Thanks to everyone for their reply. MWP

User login

Popular content

Today's:

All time:

Last viewed: