x
anonymous 4 June 2008

So...recently i have overcome a horrible latency problem thanks to the help on here :) (blasted audio latency)

Now though, i have one baffling little thing hindering my recording...

I use Hypersonic through Nuendo 2, i can triggle all the vst fine and everything sounds great although it is all panned hard right

If i adjust the panning controls far left there is just no sound and the midi voulmes in on the transport panel confirm that only one side seems to be sending...

I have tried reinstalling hypersonic yet to no avail...

I find this very unusual as the problem is not present when running hypersonic through no effects, then everything is fine in stereo...just this plug in...

help :?

Topic Tags

Comments

Kapt.Krunch Thu, 06/05/2008 - 06:01

Looking at the Hypersonic manual :shock: , you may try these things:

Go to Hypersonic "Setup" page, and 'Reset' it to default. Does that work?

If not, go to these pages, and check the pan settings: "Mix Page", "Easy Page", FX Page". Are any or all of those all panned to one side?

If not, check Nuendo settings. I did the manual sleuthing for Hypersonic, it's your turn to do it for Nuendo. Check that all the inputs and outputs are active for the right, check all settings that may affect panning, and check (possibly) if it is possible to send a mono Hypersonic signal to either a mono or stereo track, and if either can affect pan weirdly somehow.

Kapt.Krunch

x

User login