This sucks, i got this cr 1604 like i was saying, and i get it out of the box, it seems to work after i buy the power cord. Plugin the headphones cuz it was kind of late, and toy around with it. It seems like its in good enough shape. The problem is i dont have any monitors at the moment due to an electrical fire in my friends garage. So i plug the bal/unbal main outputs into this old marshal cab i have here and all i get is a terrible buzzing, like 60 cycle hum on pcp or something. could it be the marshal? it dident have a problem with my phonic mm1705, and we all know thats a peice of crap?
Anyone know whats up?
Clint
Topic Tags
Comments
this probably goes without saying since you mentioned the 60hz h
this probably goes without saying since you mentioned the 60hz hum by name - but make sure they're on the same ground circuit along with everything else in the loop.
not too long ago i saw the same problem arise when a signal conditioner somehow took a piece of equipment out of the loop that everything else was plugged into. and that was strange.
good luck.
scott sends . . .
:) Blasted, you plugged +4db into HI Z /Hi gain instrument leve
:) Blasted, you plugged +4db into HI Z /Hi gain instrument level input?. Or was it a line level input?
I expect if you don't hear hum in the phones, it could be a level mismatch, toooo much gain. Try it on the line in's of someones stereo.
Sorry to hear about about your fire :( .
--Rick