It's been ages since I've used my ADATs (blackfaces and XT20s). When I did, I had racks within which I mounted them, and the angle of incline was minimal. Now, I work almost exclusively 'in-the-box' soon will acquire a desk with rack modules. The desk's rack module configuration places the ADATs at a radical incline, should I choose to rack-mount them in the desk.
I like to sit back in my chair and I pref don't want the mic on the spider in my face.
What can I get away with?
Hi Guys,
My question is mainly in regards to spaced pair.
The more I read about OH drum Micing the more I read that both mics should be the same distance away from the snare drum to avoid any phasing problems and keep the snare in the centre of the stereo image.
Hi, I am working with a RODE NT1 with the SM1 shockmount. I am having trouble angling the mic into the proper position using a boom stand. I don't have the option of setting up the mic close to the performer, so I have the boom extended. I am wondering if anyone has any suggestions. The SM1 only pivots just a little bit and that's what is making it so difficult to work with.
Hello!
Ill be getting a console made by on the argosy D15 workstations, with an angled 8U space on both sides.
http://www.argosyco…
Is it ok to mount a Tape deck/Cd player (Tascam CDA500) in this rack ? Or should have one side modifies to a vertical rack 3U space ?
Hello all. This is my first official post. Yep, another newbie. Anyway, I know this a loaded question but I have to ask anyway. I've read a lot of professional advice on here so I thought I'd give it a shot. I'm struggling with capturing my amps true character when I record.
Hi there,
I was wondering if anyone had a favourite book on this subject that they'd recomend. It's something I really need to study and would be gratefull of any web address and or books that you have found useful on this subject.
Via Con Dios.
DAvid Ian Vaughan.
OK, I've heard everyone say to place your Nearfield Monitors in an equilateral Triange to your listening position. I'm fine with that.
But I also remember concerns with Phase distortion when speakers are angled towards the center.
So, which do you prefer?
A) Nearfields pointing STRAIGHT OUT, parallel to each other...
The KM 183s For overhead drum mics in XY.
If XY mics are above drummer should the Nuemann Logio face up or down?
[ February 29, 2004, 03:53 AM: Message edited by: JJM ]
Hey guys. This is probably a stupid question but possibly important to me.
