I am trying to use passive speakers as monitors. (I don't have anymore powered speakers). Would it be okay to plug passive speakers into a powered mixer and plug that powered mixer into the monitor out of a non-powered mixer. I already have 2 powered speakers for my 2 main speakers.
Powered mixer - Pyle PMX840BT
Non powered mixer - Mackie profx16v2
Thanks
I have a Behringer PMP2000 powered mixer with 12" speakers (B212XL) and a Behringer EP 4000 Europower power amp with 15" speakers (B215XL). I want to use the powered mixer/12s for monitors and the power amp/15s for mains. I think this is possible but I'm not sure what cables I'll need and how exactly to hook it up.
Hi,
I'm wondering is that any different in between Yamaha EMX5000-12 & EMX5016 Mixer?
I heard that the Effects is not as pretty as the OLD EMX5000-12 while compare with 5016...is it really? any experiences there?
Thanks for comment...
Hi all,
I'm looking for a powered mixer for my ceilidh band. 6 channel and the ability to isolate the phantom power to a few channels.
Seen this:
http://www.reddogmusic.co.uk/PA-and-Live-Sound/Live-Mixers/Powered/Behringer-PMH1000.html
Can anyone assist in how to use a Mackie 808m powered mixer in conjuction with a Crown XLS202D power amp? Id like to use the Mackie for my 2 Yamaha BR15's and the Crown for two monitos, I'm just not sure how to hook these things up correctly and what kind of cables I will need. Thanks in advance.
Heres the Mackie
I'm trying to do a live off the floor recording by taking the Record Tape Out on a powered mixer and plugging the 2 stereo ouputs (a Y cable) into the Line-in jack on a USB line/mic device (basically an external sound 16bit/44Khz card). The PC is a fast WinXP box with 1Gb of Ram using Audacity or Soundforge.
Hello, first time here. My question is, I believe, a basic one. I have an old TOA MX-106 powered mixer and am looking at getting new speakers. The specs say:
Rated Power & Load: 300W RMS (2 ohms ) 200W RMS (4 ) 120W RMS (8 )
Power Requirement 600 W 120V AC 50/60Hz
Hi agaaain.
I need your advice on what the best way of recording drums with a Yamaha EMX5000-12 mixer and a Tascam DP-01FX portastudio.
i just wanna know like "hey, you plug this here and that there and then you send one out into this thing and then you pan it left blablabla" sort of thing.
hey i just bought a Roland VSR 880 digital recorder and i was wondering if it was possible to hook up a Yamaha emx5000 to it. if possible can you tell me what to do to record. thanks
