Greetings,
I have an older, used, "patent pending," Shure 545S Series 2 (pistol grip) microphone, and I'm gradually fixing it, having first reassembled the switch in the handle section. I do get sound from the mic, but it is a little on the quiet, "hollow," and less low-frequency side. I'm using it as high-impedance.
Greetings-
I recently bought an older Shure 545 (4-pin Amphenol era) on eBay, and while it works, it sounds a bit of the dog with voice: a greatly diminished low end, and reminiscent of talking through a paper towel tube.
Hi all, first post here, though I've lurked for quite a while now. I recently saved a handful of mics from the recycling bin, and need a wee bit of assistance with some of them.
Before I begin, I should mention that I am a semi-professional electronics repair tech and I do a lot of work on amps, synths, and recording gear, but not a lot of microphones.
Hey all, i finally got around to fixing my car stereo, which is a 'component' system, where the speakers have separated mid/tweeters and a sub box in the trunk, nothing fancy, stock (radio head unit) power for the mids tweeter, 250w amp for the bass box.
Hello friends,
There is a small (less than one second) of clipped audio in a take I recorded with my band. I've been messing with the file in logic (experimenting with the multipressor, and sample editor, and EQ) and cannot seem to get anywhere.
{"preview_thumbnail":"/sites/default/files/styles/video_embed_wysiwyg_preview/public/video_thumbnails/pWvq51U4aYU.jpg?itok=KcRoE8FP","video_url":"https://youtu.be/pW…","settings":{"responsive":1,"width":"854","height":"480","autoplay":0},"settings_summary":["Embedded Video (Responsive)."]}
hello.
i got some vocal tracks which are a bit distorted on the louder parts. mostly only slight distortion, sometimes a bit more.
it's no digital clipping. the engineer told me it's because the singer was too close to the mic, so it seems the preamp clipped.
is there a way to "repair" the tracks, cause redoing them is no option.
