Skip to main content

I am still a beginner with Pro Tools and recording in general. I have an Mbox, and have make some decent recordings, but I just picked up a PreSonus TubePre and now I'm having a very tough time getting my vocals to sound right. : (

I have an Audio-Technica AT3035 Condenser mic going into the TubePre via XLR and then another XLR connecting the TubePre to Source 1 of my Mbox. I am using the Phantom power on the TubePre (and not on the Mbox), along with the "80Hz option" which I believe eliminates unwanted backround noise. The source on the Mbox is set to LINE.

I have played with the GAIN and DRIVE on the TubePre, as well as the GAIN on the Mbox, as well as the Pro Tools standard Compressor Plug-in on a Bus track, (which is sending the compressed signal to a record-enabled track.) It seems like I can either get a compressed signal with too little dynamic range, or too much range with consequent distortion at peaks. It's very frustrating, because I feel like my vocals sounded better with the original set-up using just the Mbox and its Focusrites.

Also, I am recording rap vocals in a foam-padded closet.

Any tips? Ideas? They are badly needed! Thanks.

Comments

David French Wed, 04/07/2004 - 21:57

I think this may be a case of a pre having too much personality for the material. Most people i've talked to like to use a quick, uncolored pre for rap vocals; unless you're Ja Rule, the harmonic distortion of a vacuum tube probably doesnt belong in the signal chain. I think you should go back to the Focusrites. Just my guess.

anonymous Wed, 04/07/2004 - 22:14

That is disappointing... Are you sure there's no way I can adjust the Gains and/or Drive in a way that will not create distortion? What about the distance from the Mic? Or the volume at which the artist is rapping? I really like the warmth of the Pre, and would be a shame to waste $100.

Also, I will be recording R&B vocals, would I not encounter this problem with singing as opposed to rapping? Thanks again for the help.

David French Thu, 04/08/2004 - 14:07

Theoretically, the best tone for you should be when you have the drive knob set to zero. This will minimize distortion from the unit. I just don't think this pre is for you. You could return it, sell it, or keep it around in case you ever want to record something besides rap. I don't even think you need an outboard pre. For what you're doing, your focustites sould suit you just find. IMO, you'd have to spend at leat $500 for one channel af better pre. If you're ever ready, take a look at the Sytek MPX4A - four channels of nice clean quick pre for about $650 used. Either that or ask Kurt, Gaff or somebody to reccommend you a real killer one channel unit.