I need to put together a drum mic set ASAP. And i am foxed by lack of availability this side of the world. Most (of the very few) distributers here do not stock.
And order on prepayment only. Which usually takes a lot longer than promised etc etc..
So for the snare I already have a SM57.
Intend on using SM58's (maybe Beta 58's if i can) on the toms.
For the kick the only thing readily available is the Sennheiser e602. I
read up and i think it's ok.
For the overheads. The only SDC available in the market off the shelf.
AKG C1000, Behringer B5, mayby the 451 (too expensive) and maybe the
Behringer ECM 8000.
I have spent the past hour and a half trying to fing something good
told about the C1000. Not happening. So that is out. I anywaz have not as of yet heard an AKG (i have not heard much either) that I really taken a liking too. The 414 i found to be a bit harsh. The 451 a bit bright (but maybe i just over EQ'd it when i worked with them a while back)
I also get to work in a studio with the Behringer B2Pro and dont like
it. so i am a bit sceptical of the B5 (it comes bundled with a omni
capsule for cheap).
Surprisingly ppl seem to mention use of the ECM8000 measurement mic (have read so before also) though since it is omni i might be a little conserned of getting more room that i like, espessially since i will not using any great rooms.
So that leaves me with nothing.
If I can, I have the option of waiting through and perhaps being able to order (while building a bank balance) a pair of sennheisers SDC's e.g. e614.
However, if push were to come to shove and i need to buy, which is the better of the bad ?
Also i have read a lotta good bout the Oktava 012. Now i was looking for the home page and am a bit confuced. I have found the following links :
http://sound-room.com/ (also http://www.oktava.com )
While both companies seem to stock Oktavas, at oktava.net we have the model MK012 while at Oktava.com (aka sound-room.com) we have the model MC012 . The mics seem similar.
This passage from the sound room's home page had me particularly
confuced :
"Yes, we know. some large "chain" and "cataolgue sales" stores may offer "OKTAVA" microphones. What makes our RTT/OKTAVA microphones different is the selection process for specific acoustic and electronic parameters, our own quality control and warranties, our "cute" cedar boxes and the fact that we sell parts, do service and even sell accessories for Russian mics - we'll even sell you those cute cedar boxes for your mic collection! "
Sound room saz they ship worldwide. So this could be a viable option.
I would like these mics to be versatile, acoustic guitars etc
Please Advise.
Thank you.
Sidhu
Tags
Comments
Hey, Sidhu most of the failures have been just a slight distorti
Hey, Sidhu most of the failures have been just a slight distortion of sound. Nothing more than that. Although that's pretty big.
I guess I just would rather not hang my hat on something so shaky in quality.
I run a rather large commercial recording studio, so when a mic fails during a session it's a big deal.
Please email me and I can talk to you about international shipping further.
Chris
thanks chris. Ill keep the mail for when im serious about purcha
thanks chris. Ill keep the mail for when im serious about purchase (maybe the UAD 1 first and then some nice blue mics).
Distortion is serious. But the ppl at http://www.oktava.com claim to be very thorugh with the mics. how does it sound ? Will ask if the 535 is available tommorow. Its 2:30 in morning here right now. :wink:
Sidhu
yes, we get Studio Projects here. But they are a tad expensive (
yes, we get Studio Projects here. But they are a tad expensive (twice of what youd pay for em in the States.) The 535's are not in stock . Will take a month to deliver, and there is no stereo pair
The 81's cost USD400 here. Outta my range.
I record these instruments often and would like something versatile. Flute (all kins, bamboo) Violin (Indian Carnatic mostly, a lot fatter than what western classical sounds like) Tabla, Dholak , Dholl and other indian percussions. Heavy Metal and voice. Guitars too. Though a good acoustic guitar sound has so far alluded me.
Got a mail from Soundroom. They say theey can ship to india. The oktavas seem ok. The only ther option i seem readily available is the 451 (expensve) and the 81(expensive).
Im stressed.
At the RAP SCotts been constantly suggesting the importance of dumping the 602 (not that its bad) and getting something more versatile like the 421. But the 421 will take all my budget.
In fact if i were to import a pair of 012's id probably be left with nothing for the 602. So can i resort to using the Beta 58A in the KIK ?? hoiws that sound ?
The cost of a stereo pair Oktava MC012 import from Soundroom wi
The cost of a stereo pair Oktava MC012 import from Soundroom will almost equall the purchase of two AKG451 mics (not matched) locally. And the pair of Shure SM81 (not matched) would be a tad more. What is the best choice ?
I might also get a pair of Studio projects C4's for bout the same (though i doubt it, and availability might not be there)
Thak you,
Sidhu
At the RAP SCotts been constantly suggesting the importance of d
At the RAP SCotts been constantly suggesting the importance of dumping the 602 (not that its bad) and getting something more versatile like the 421. But the 421 will take all my budget.
I personally don't like the 421 on kick ... It doesn't seem to get the low end or the "tick"that a D112 gets. The D6 and RE/PL20s both get the lows but still are hard to get "tick" out of. I am now thinking about trying the 602 due to comments made here recently.
I like 421's on guitar and bass cabs for the punch and "edge" they provide. The 421 has a big 8 dB mid range boost starting at 1K in the flat position. Depending on how you set the roll off switch, the rise point changes between 500Hz and 1K Hz.
The 602 .... jeeze! Look at the curve on that one !!! ... A typical "smile curve", with an 8dB boost at 100Hz going down to flat until it reaches 1K again where theres another boost of 8 db to 3.5K where it goes to a huge 10dB boost extending out to 14.5K where it rolls off.. I'm not too sure about that boost starting at 1K ... I usually don't like that much 1K in anything .. !
Are the import duties to India very high or is the shipping that is bumping up the prices to you ?? Perhaps the combination of the two? Depending on which it is, pehaps a RO member would be willing to purchase some SP C4's for you and arrange to ship them to you. There has to be a work around this problem..
Kurt Foster wrote: I personally don't like the 421 on kick ...
Kurt Foster wrote:
I personally don't like the 421 on kick ... It doesn't seem to get the low end or the "tick"that a D112 gets. The D6 and RE/PL20s both get the lows but still are hard to get "tick" out of. I am now thinking about trying the 602 due to comments made here recently.
That exactly what i felt. But ive been told that there is a possibility that i had bass rolloff on. I dont remember.
I like 421's on guitar and bass cabs for the punch and "edge" they provide. The 421 has a big 8 dB mid range boost starting at 1K in the flat position. Depending on how you set the roll off switch, the rise point changes between 500Hz and 1K Hz.
Im sure it's a great mic Ill place it very high on my soon to be puchased list now
The 602 .... jeeze! Look at the curve on that one !!! ... A typical "smile curve", with an 8dB boost at 100Hz going down to flat until it reaches 1K again where theres another boost of 8 db to 3.5K where it goes to a huge 10dB boost extending out to 14.5K where it rolls off.. I'm not too sure about that boost starting at 1K ... I usually don't like that much 1K in anything .. !
I really dont have much of a choice on that now. Maybe the 1K would help in the kind of music im recording nowdaz. Metal.
Are the import duties to India very high or is the shipping that is bumping up the prices to you ?? Perhaps the combination of the two? Depending on which it is, pehaps a RO member would be willing to purchase some SP C4's for you and arrange to ship them to you. There has to be a work around this problem..
The import duties are very high. Add to that the custom officials are currupt pigs. Getting someone i know to ship them across might be a solution. But i think it would be too much of a favour to ask.
And i dont really kn ow anyone that well. :wink:
But ive arranged for the budget. Onlt it's a lot more than what id pay in the west. Never mind.
And thanks a ton for the help.
Sidhu
Sidhu, If you have a credit card you can charge the mics to, y
Sidhu,
If you have a credit card you can charge the mics to, you could order them from Studio Projects (or who ever else you want to buy them from) and have them shipped to me ... and then I will forward them on to you. We would have to work out the shipping costs but I would be more than happy to help you out on this if you wish ...
Maybe Fletcher from Mercenary or Chris from Littledog would be willing to help you do a run around on the "corrupt pigs" too .. ??? There may be an issue for them as to endangering their business ... if this is the case, as a private party, I don't have to worry about that . We could just say that I was returning them after "borrowing" them from you.
If you have a credit card you can charge the mics to, you could
If you have a credit card you can charge the mics to, you could order them from Studio Projects (or who ever else you want to buy them from) and have them shipped to me ... and then I will forward them on to you. We would have to work out the shipping costs but I would be more than happy to help you out on this if you wish ...
Thats the kindest thing been said to me in a long time. Thank you.
:)
I'll figure if this is a practical possibility. And then id email you. Whats your ID ? mine is nitinsidhu@mailcan.com
As for mics. I think ill settle on the Okatava MC012 for now. Ill take it from there then. Depending on budget.
Sidhu
Screws wrote: I use the ECM8000's all the time on overhead, and
Screws wrote: I use the ECM8000's all the time on overhead, and they sound fine. I too have a small room (14' x 17') with a low (8') ceiling, yet the ECM's still work well. If they're as cheap in India as they are here, buy them to use for now and upgrade when you can.
thanks screws. ill chek those out too...
No one has mentioned the ATM25 for the kick....its really really
No one has mentioned the ATM25 for the kick....its really really good...not the cheap model but the ATM25....klik and thump...the Audix D6 is a killer mic on kick....the angle at which you aim it inside the drum determines the klik...As Flethcher said, the Shure SM81 is a great mic capable of many things...the instrument list and sounds you mentioned would simply be meat for these little beauties.I have an old studio partner and acquaintence who records primarily belly-dancing music at this time ...he uses tambla players and all of that stuff and he still uses the Sm81's we were using 15 years ago...they just sound great.Do yourself a favor and spend the cash on these and you'll never regret it or look back from that point on.
The e602 is a good choice for kick. I like it quite a bit better
The e602 is a good choice for kick. I like it quite a bit better than the AKG d112.
If your looking for a pair of overheads that are versatile on acoustic guitar, then check out the AKG 535. I think they are one of the most under-rated condeser mics on the market.
They aren't too shabby on vocals either.
I tend to shy away from the Oktava stuff. I have experienced about a 50% failure rate om them. But, I do have thier ribbon model that comes in handy often.
Hope this helps.
Chris