I am looking for a dual channel pre-amp in the price range of $300-$500. I want a preamp that will add a lot of warmth with low noise to a variety of instruments and vocals. It needs to be good quality and something that I can be happy with for a long time. If you have a recommendation could you please let me know what it is.
Comments
Is the compressor and eq on the Focusrite pretty good quality?
Is the compressor and eq on the Focusrite pretty good quality? If it was between the Focusrite and the Groove Tubes which would be better in adding warmth and good sound quality with low noise? One thing I like about the Focusrite Twintrak though is that it comes as a rack.
Preamp Recommendation Nothing beats a direct comparison. See if
Preamp Recommendation
Nothing beats a direct comparison. See if you can locate a pro audio dealer in the area that will allow you to audition or try out more than one unit at a time. If you can't arrange that, see if you can at least use some of your gear with preamps in a store (bring your own microphones, etc.).
If you aren't able to do direct comparisons, other people's comparisons may help. 3D Audio (http://www.3daudioinc.com) has a comparison CD with a bunch of preamps (3D Pre CD). Also, there are some comparisons on this forum in the Pro Audio Reviews topic (Microphone Preamp Comparison by Kurt Foster).
I really like my Aphex 207. You can pick it up for less than $400 on eBay (I saw it go for about $250 at some point - an amazing deal).
DIY is always a possibility if you are looking for best value an
DIY is always a possibility if you are looking for best value and don't mind a little more 'involvment' in your gear acquisitions.
http://www.hamptone.com has a couple of outstanding kits in the $500 range - maybe a little more than your ideal budget but they would most certainly fulfill your other criteria:
It needs to be good quality and something that I can be happy with for a long time
Keep in mind the brick is only a preamp and not a channel strip,
Keep in mind the brick is only a preamp and not a channel strip, i.e. no built-in comp/limit, EQ, etc. In my experience, I need comp in the live signal path when recording vocals. You'll have to budget for a good compressor(s) if you go the brick route.
The Focusrite gives you a decent cost/features ratio. The Platinum stuff is middle of the road, but I don't think you'll being throwing it in the trash anytime soon.
AG
I have been doing a similar search, I've raised my budget a litt
I have been doing a similar search, I've raised my budget a little though. I am going to probably go with the Hamptone (http://www.hamptone.com). For under $500 the FMR RNP gets rave reviews on almost every forum but this one. Read the reviews http://www.mojopie.com and sound on sound. the Brick looks very cool too. Pick up any of these and an RNC and you'll have a pretty good front end for not a lot of dough.
I haven't been able to compare the Brick and the Twintrack head
I haven't been able to compare the Brick and the Twintrack head to head, so I can't really comment on which preamp is "better." Some consider the brick to be more of a real preamp (better power supply, etc.), but I think the TwinTrack is great for the money. I like having the compressor and the eq options. It also has an available digital option which is handy. I was out of analog ins on my AD so I use the TwinTrack's SPDIF out. Good Luck!
Wes
When you get in the 'great for the money' type of descriptions y
When you get in the 'great for the money' type of descriptions you know you should get sometime else that is just plain 'great' The brick might not have bells and whistles but its 'great' and you wont have to replace it down the line. If you want a little compressor that 'can do' get a RNC for just $175 to add to your brick, if you must compress as you track, that is.
The Hamptone JFET has transformers in/out but is relatively clea
The Hamptone JFET has transformers in/out but is relatively clean and nuetral with huge gain, bandwidth and output. Very low noise as well. Two channels of outstanding pre with DI's for under $600 is not a bad deal!
Scott [Hampton] will have a compressor kit out sometime in the not too distant future. Following is a quote from an e-mail I got:
I am however nearly complete with the design for the Opto Compressor kits. They will be built into the same size enclosure, transformer balanced, full controls, meter... I'm thinking the single channel JFET unit will be around $299, but that is an estimate. I am doing a workshop at the TapeOp 2005 conference, where we are going to build a very simplified version of it
Not as inexpensive as RNC but it will probably kick butt!
If I recall correctly, the 002r has 4 XLR ins and 4 line ins, ri
If I recall correctly, the 002r has 4 XLR ins and 4 line ins, right? Go line-out from the brick to a line-in on your 002r. The brick may have an XLR connector on the line out, in which case you'll need a cable that goes from XLR to TRS (1/4"). Otherwise just a 1/4" cable will get it done.
I'd probably save a little longer and spend a bit more money. Y
I'd probably save a little longer and spend a bit more money. You might look at the Focusrite TwinTrak Pro. It's a pretty good unit w/ built in compressor and eq. A lot of people highly recommend the Groove Tubes Brick (single channel so you'd need two). My 2 cents.
Wes