Hello, I have been using the m-box with pro tools le for a while now. I want to have a huge board in front of me to control what I see on my screen instead of moving the mouse all the time. I know digi design makes some small one with like 8 or 16 tracks, but I want something big, like the ICON (maybe not THAT big)... and of course the ICON is way out of my price range. Can somebody tell me how all that works? What kind of boards to I have to buy in order to make it control pro tools, and for example if I draw some automation on Pro Tools, it will make the board adjust the faders according automatically as the song plays. I don't even know what the boards are officially called. Can somebody just give me some information on how I can go about doing this? Thanks!
Comments
mark_van_j wrote: Check out the Tascam US 2400. It's gotten poor
mark_van_j wrote: Check out the Tascam US 2400. It's gotten poor reviews, but it's about as big as I can think of at the moment.
that doesn't have motorized faders right? Will it save my settings? If I open a new session will the faders go to where they are supposed to automatically?
You may want to check out the Mackie. It can be expanded to at
You may want to check out the Mackie. It can be expanded to at least 24 faders.
dirtysouthstunta wrote: [quote=mark_van_j]Check out the Tascam U
dirtysouthstunta wrote: [quote=mark_van_j]Check out the Tascam US 2400. It's gotten poor reviews, but it's about as big as I can think of at the moment.
that doesn't have motorized faders right? Will it save my settings? If I open a new session will the faders go to where they are supposed to automatically?
Actually go to sweetwater.com and read up on it. I believe it does have motorized faders, and the knobs have meters around them that you can use for metering, and some plug settings I believe. I messed around on one for about 15 minutes, its was ok, not huge but does have about as many faders as I would use, also has pan controls and a few other nice little features. I don't think it controls much besides eq and compression but again you may want to read up on it.
I use a Behringer BFC2000 and BCR2000. The appeal here is price
I use a Behringer BFC2000 and BCR2000. The appeal here is price point. I've read they work by emulating the HUI in ProTools. They are cheap, very flexible (can operate DAW, MIDI gear, MMC, VSTi, etc.) and the faders are actually really nice, fully automated 100mm. The rotaries are endless with a handy LED ring so everything is 100% "restorable" and visual. You can take snapshots, load setups, and a zillion other things. If you can afford an ICON great but if you're trying to http://www.zzounds… get into a controller for $200-ish then I don't think anything can beat the BFC2000. The rotaries on the BFC are also "dual function", i.e. clickable like a button. Very cool, the controls feel very nice and the unit is USB with full support for MIDI I/O, footswtich, etc. It's easy to map any of the controls, including the footpedal to any function in your DAW in a variety of ways including "learn" mode which is a no brainer. :D
I haven't used it in ProTools but here's what I've read:
Inside of Pro Tools, under Peripherals go to MIDI Controllers and choose HUI, then choose BFC2000 and choose BFC2000 again and your set. Easy as that. It works like a charm
Calgary wrote: I use a Behringer BFC2000 and BCR2000. The appeal
Calgary wrote: I use a Behringer BFC2000 and BCR2000. The appeal here is price point. I've read they work by emulating the HUI in ProTools. They are cheap, very flexible (can operate DAW, MIDI gear, MMC, VSTi, etc.) and the faders are actually really nice, fully automated 100mm. The rotaries are endless with a handy LED ring so everything is 100% "restorable" and visual. You can take snapshots, load setups, and a zillion other things. If you can afford an ICON great but if you're trying to http://www.zzounds…"]get into a controller for $200-ish then I don't think anything can beat the BFC2000. The rotaries on the BFC are also "dual function", i.e. clickable like a button. Very cool, the controls feel very nice and the unit is USB with full support for MIDI I/O, footswtich, etc. It's easy to map any of the controls, including the footpedal to any function in your DAW in a variety of ways including "learn" mode which is a no brainer. :D
I haven't used it in ProTools but here's what I've read:
Inside of Pro Tools, under Peripherals go to MIDI Controllers and choose HUI, then choose BFC2000 and choose BFC2000 again and your set. Easy as that. It works like a charm
WOW!!! only $200, can it really be a good controller for only $200?
I like it. It's decent quality with nice faders and tactile rota
I like it. It's decent quality with nice faders and tactile rotaries. It has some advantages over some units, for example the TASCAM 1884 has no visual indicators on the rotaries (???) but the rotary LEDS on the behringer are awesome, visible from across the room in fact. I like the USB MIDI I/O/THRU and dual footswitches.
It's not a replacement for a full blown pro surface but it's got a lot of kick for the buck and the automation is top notch. Godo drivers, firmware upgrades from the Behringer site, etc. They even give away a free PC based editor for the BFC.
It also acts as standalone MMC control for any gear with MMC such as stage light controllers and external processors. And best of all it works for VSTis, so for example it's great as a drawbar control for your hammond or an editor for your drumkits... :)
Re: HUI hociman wrote: At the risk of coming across as an under
Re: HUI
hociman wrote: At the risk of coming across as an undercutter...
The studio I work for does have a Mackie HUI for sale. Send me a message if you are interested.
Hey Hociman, could you please email me at matt@nospam soundendeavour.com if the Mackie HUI is still available?
Obviously remove the "nospam " from the address.
Thanks! :-)
Matt
Check out the Tascam US 2400. It's gotten poor reviews, but it's
Check out the Tascam US 2400. It's gotten poor reviews, but it's about as big as I can think of at the moment.