Well , thats what learning is all about :)
If u make a mistake , remember what you did , and don't do it again!

Where are your levels peaking at?
Where were u checking your levels while tracking? On the screen or on the desk?
Were you using -10dBu outputs on the desk while having the input sensitivity on the 001 set to +4dBm?

If you are desperate (and i do stress "desperate"), noramlise every track. Dont normalise everything to 0dB!! If you do this , then you wont have any headroom left for your plugins. you'll start getting clipping if you add EQ.normalise to -5dB as a starting point i guess.

The good side of this is that you'll have lots of level. The bad side is that any noise on the track will also get louder. Oh yes , and you'll have to rebalance your mix because the tracks will now be at different levels realative to each other.

Please remember that this is not a quick fix for any time you record at a low level!! Its nowhere near as good as getting the right level to tape (disk) when you are recording.

Good luck and have fun.

D

just a guess here but maybe u set your gain right going into the desk but didnt check what levels were actually going to tape?

OK Computer you hit it on the head! What you describe is exactly what I did. Oh well I'm new at this. I now know what TO DO and what NOT TO DO. Now I must go bash my head against a wall.

hey, look on the bright side. . . you've slimmed the chances that you'll EVER do this again.

Originally posted by ChrisS:
Now I must go bash my head against a wall.

Absolutely unnecessary!

Did you have fun doing it?
It's your first real recording, hundreds will follow. Let's say you broke the rules on purpose. :D

"Of course I know the levels are low, professor. It's all about dynamics...the MUSIC!"

Where do you go to school?

Juergen
PS: You could always shmaster it. Just kidding. Please don't. Well, do what you want. :p

Well put! I'm reminded of the Thomas Edison quote:
"I have not failed! I've just found 10,000 ways that won't work."
-kent