Skip to main content

Does anyone know of any problems running audio on a Matsonic Motherboard with an sis chipset. here is the chipset: SIS 651 + 961 and SIS 651 + 962.
I am running a gina 20 with P4 2.0, 512 ddr.
please help me cause sometimes it runs great and others it fails. I run Win2K with sonar, nuendo, Acid, WaveLab 4, Sondforge 6, and some other stuff.

Comments

anonymous Wed, 01/01/2003 - 12:38

My bios doesnt give me ratio settings. I am going to purchase a new Motherboard with an Intel chipset. Which Intel chipset will work the best with my gina20? I am going to swap it out and then build a internet surfing pc with the sis board. thanks! it has been running ok lately, but I cannot get my latency very low at all.

Opus2000 Wed, 01/01/2003 - 16:56

Any Intel chipset will work with the echo products...Intel is the safest way all around, works with everything.
The reason being is that Via, Sis and Ali all don't go with the motorolla chipset design codes. They go against the grain so to speak. So that causes your lack of low latency, constant problems or a working card in general.
HTH
Opus