anonymous
11 October 2005
Im using the onyx 1640. .i just brought a samson stereo headphone amp. i ran the headphone out in the 1640 to the headphone amp and i can only hear audio in one ear...i believe this has something to do with the stereo output.how can i fix this. .oh this is obviously a newbie question. thanks in advance
Comments
make sure that the cable you are using from the mixer to the hea
make sure that the cable you are using from the mixer to the headphone amp is a TRS (tip/ring/sleeve).
This means when you look at the metal thingie that sticks in the hole thingie, you should see two black rings on it instead of one. That separates the plug into 3 sections, one for right, one for left and one for ground.
If you are using a standard instrument cable, then you only have two sections on the plug thus you will only hear one channel.