hello every one . i was wondering is it possible to take a stereo track out of a computer thru MOTU 828 mk2 to the dbx DDP and thru the finalizer 96k and to the masterlink without it sounding all messed up or getting some kind of digital flanging or will it be ok and sound good ...sorry if its a stupid question and thanks for your time ...max
Topic Tags
Comments
3 gears to master ??? thanks john for your reply ...well what i
3 gears to master ???
thanks john for your reply ...well what i wanted to do was use all three of them to do mastering .like from the motu 828 to the ddp and use the ddp for a littel pre mastering then send it to the finalizer 96k for the rest of the mastering and then to the masterlink to burn on cd at 24bits and use some of the presets in there to warm it up befor its fineshed please tell me what you think .thanks max
Well, this is just my opinion, so take it as you will... When I
Well, this is just my opinion, so take it as you will...
When I listen to a track, I try to "visualize" what it *should* sound like when it's done.
Then, I try to figure out what it's going to need, take a guess at some rough settings, start playback again and tweak.
I'd just try that on both units (the DSP in the Masterlink just does nothing for me) and see which one sounds closest to what's in your head.
The masterlink is a good playback device. I use mine as a player
The masterlink is a good playback device. I use mine as a player. I take all of the files for a project, sometimes they very in bit and sample rates, and I create a CD 24 on my computer that will playback from the masterlink. I then route that out aes, run through my gear, SRC'ing and dithering down into my workstation. All done in one shot. For this, it works great.
Going through should be fine - It depends on what happens to it
Going through should be fine - It depends on what happens to it on the way...