Hi guys
A little trick I hear on a lot of Ryan Adams records and other mellow roots stuff includes putting a delay on just the s's and t's of the vocal... has a nice ambient effect.
I imagine they're boosting certain frequencies in whatever their sending to the delay, but I haven't been able to quite figure it out.
Any tips?
(FYI: I'm on Pro Tools)
Comments
I'm not sure about PT, but think about it...You want just the si
I'm not sure about PT, but think about it...You want just the silibance, so find it with an equalizer. You still want the dry signal, so you make the EQ'd silibance experiment it's own track. You wan't delay, well, there you go. It will be helpful as well to put the dry signal @ 0% so that those (what are usually painful) silibants don't double up on you.
Brian Trudeau is also very good at this, it allows for rhythmic tangents without straying too far from the material.
most de-esser plugs have a monitor function (you just hear the s
most de-esser plugs have a monitor function (you just hear the sss part), send that to a delay/verb..
In Pro Tools doesn't the Lexiverb plug do that?
In Pro Tools doesn't the Lexiverb plug do that?
Why don't you just try to record the main vox without the sibila
Why don't you just try to record the main vox without the sibilance and then come back and rerecord just the sibilant parts and add either reverb with a long decay or a delay.
thanks guys. i knew it was a silly question and i kept on tryin
thanks guys. i knew it was a silly question and i kept on trying a bunch of sidechain stuff and was always getting doubling of my sibilant parts when copying and EQ'ing a track... your comments should help.
i don't have the LexiVerb plug, but I'll check my other verb plugs...