Skip to main content

Yamaha MG10XU as a controller for LogicPro

Hi guys!

Is it possible to use an Yamaha MG10XU as a controller for logic pro?
If so, can someone tell me how can i configure it a MacBookPro mid 2011?

Thanks in advance!

Cheers

Comments

Boswell Wed, 08/01/2018 - 09:32

"An I/O plug-in" is a rather vague term.

The MG10XU only sends and receives two channels of digitised audio down its USB cable. There are more sophisticated mixers with digital outputs that will also act as a control surface for a DAW. I'm sorry to say that I don't think the MG10XU is one of those.

Do you have a link to YT showing the sort of thing you are after?

Boswell Wed, 08/01/2018 - 11:23

I took a look at the video you linked. It's all about using an analogue processor of some sort as a plug-in to a mix "in the box", i.e. a DAW.

Now it's possible you could do exactly this using the MG10XU by setting the switch on channels 9/10 to USB. You could, for example, play out a mono track from your DAW, put it though the effects unit on the mixer, and feed the result back into a new stereo track in the DAW.

This would be an example of using the USB connection as a bidirectional pipe for digital audio signals. It does not allow you to control the DAW operation from the mixer.

Lois Avil Wed, 08/01/2018 - 11:34

Boswell, post: 458375, member: 29034 wrote: I took a look at the video you linked. It's all about using an analogue processor of some sort as a plug-in to a mix "in the box", i.e. a DAW.

Now it's possible you could do exactly this using the MG10XU by setting the switch on channels 9/10 to USB. You could, for example, play out a mono track from your DAW, put it though the effects unit on the mixer, and feed the result back into a new stereo track in the DAW.

This would be an example of using the USB connection as a bidirectional pipe for digital audio signals. It does not allow you to control the DAW operation from the mixer.

I´ll try this later with time and let you guys know the feedback.

pcrecord Thu, 08/02/2018 - 08:08

I've read about it, it is not a controler, just a mixer and you can send the audio via USB to your computer.
Controlers, use midi protocol communication to send instructions to the software for various fonctions. Play, rec, volume fader moves etc..
In any case anything without a transport section is worthless as controler and without motorised faders, it's limiting any automation process.

x

Register