"The finest recording system in the world"
2015: RADAR and Pro Tools in One Box

I tried to record our live performance with Zoom H4n recorder, but I accidentally had wrong input on. Is there anything I can do?

Hi all,

Okay, so here’s a long tricky question that I’m seriously hoping someone can help me with!

A high pitched chirp/click/zapping sound has been appearing through my computer recording setups lately.

Here’s where it gets tricky.

Hi all,

I understand that this is a newbie question, and it's all hypothetical at this point, but:

Let's say I record someone's song for them. In my case it would just be a demo. I claI'm no rights to it whatsoever.

I record on a tapco 6306 mixer and record files using an AT3035 mic, and adobe audition software. I'm told that my studio sound is fuzzy and has a pronounced echo. I never hear that in my studio but that's what the other person is telling me. Any suggestions?

Hey everyone, it's been a minute.
Looking to get some suggestions from you guys for a pair of monitors that are known to be complimentary to Yamaha NS10's. Looking known monitors that that expose flaws in the mix that NS10's don't, hence "complimentary".
I already use Mixcubes in conjunction with the NS10's.
Budget limit of $3000.00

Hey guys, I'm hoping someone can help here with fixing an earthing hum on my steel string acoustic guitar.

It has a Fishman infinity preamp and piezo under saddle pick up installed.

Observations : If I touch the metal end jack insert the hum goes away,
I put one hand on the mixing desk the hum is gone,

This is an OTB mix, ( 2 DAW workflow) but instead of using my go-to Monitor One's, this time I used Tannoy Reveals 6.0 (passives) as reference NF's, to test them out and see how they translate to other systems. (Power Amp is a Hafler Trans-Nova 1500).

If you are using a DSD production workflow, what equipment are you using, what have been your experiences, what needs to be done to make this workflow as easy (if possible) compared to PCM workflow?

Long time, no post for me. Glad to see the forums here still hopping.