Skip to main content

diy

Your Avatar
Submitted by Schertler on Wed, 12/30/2020 - 14:12

I have got discovered vintage AKG CK12 Brass capsule at home.

I would like to build a mic with this capsule and use a standard one-transistor Jfet circuit of ECM electret mics (common source either
source follower)...

Has anyone ever tried to wire such a large capsule with a single Jfet transistor ? Do you think this might work as a decent condenser mic ?

Your Avatar
Submitted by DeadMusik on Thu, 02/20/2020 - 14:18

Hello I have bought a kit from pcb grinder the ms76 kit.
Have to say was a damn blast building it, will be my first big build over my diyre stuff which is excellently described of the build process.

so my question..

Your Avatar
Samplitude
Submitted by pcrecord on Mon, 06/05/2017 - 02:48

Hi guys,

Here is a new mic shoutout that includes 3 products from microphone-parts.com
I had many questions about the mods and the DIY Kits.
Hope you can hear the subtle differences.

I'm still getting used to audio and video productions so your comments are needed and welcome.

Btw, I'm not a signer you might have guessed ;)

Your Avatar
Submitted by komencanto on Fri, 01/27/2017 - 10:05

I'm trying to estimate two cost points for an acoustical door:

- The entire assembly including mounting hardware, seals etc.

- The door panel itself, excluding hardware, handle, etc.

I have a way to go before arriving at an estimate for the entire door, but come up with this baseline cost based on Rod Gervais's book:

Your Avatar
Submitted by achase4u on Thu, 01/05/2017 - 09:29

I first learned about CAPI gear on the forums. I was looking to dip my toes into the world of API sounds, not fully knowing what that meant. I had heard all the descriptors like punchy, forward mids, aggressive, tight, etc., but wanted to try it out for myself. So many great albums were done on API's, right?