Hi!
My MXL 770 is very low volume and there is a noticeable hiss.
I haven't used it in a while and the last time it was on a different computer and it worked fine.
I use a Neewer 48V 1-channel phantom power supply.
I am not very experienced in troubleshooting this kinda stuff so if anyone could help me thatd be great!
Hi gang,
Here's a video in which I mod the MXL 990 with a new Capsule ! (RK47 from microphone-parts.com)
Tell me what you think
Hi all -
I have: balanced cable, Konnekt24D balanced in, phantom powered MXL770 and receive rare random clicks/cracks. When I record guitar, everything is fine.
I recorded 15min silence - nothing. It happens on voice.
What that can be?
Here is the sound: https://gofile.io/?c=cJkanM
For some reason when I'm in fruity loops my microphone picks up buzzing sound and hissing noises.
mxl 770 cardioid condenser microphone paired with a Neewer 1-Channel 48V Phantom Power Supply with Adapter, BONUS+XLR 3 Pin Microphone Cable for Any Condenser and
I have purchased the MXL 770 and connected it to my laptop with an usb-XLR cable like this one because my laptop doesnt has a microphone input : ( https://www.amazon.ca/dp/B07WR14TYX/?tag=r06fa-20 )
And it don't seems to work neither on Fl Studio or Audacity.
Hello!
I have a problem with my MXL 770 mic
Yesterday that was all ok.
But now i hear so many background/static noise from the MXL 770.
I attached file with that hum.
What can i say more..
It is not problem with mixer or cable.. i was connect mxl 990 with the same cable, mixer, and input channel
and 990's haven't problem.
I'm using the MXL 770 along with the Behringer U-Phoria UM2. Now, the Behringer use to make a lot of noise until i updated a driver. I knew it was the audio interface since i disconnected the actual recorder from it, and the laptop still allowed me to record. Now after that problem is gone, i still find background noise when connecting to the condenser mic.
Hello, this is a second in a series of Ribbon Mic upgrades. Thought you all might be interested.
Hello, I’m beginning my personal little crusade in the Ribbon Mic arena.
To start, I’ve created an Instructable, to upgrade an MXL 990 condenser mic with a ribbon element from http://www.diyribbonmic.com/parts
I created some 3D printed parts to hold the ribbon element and transformer.
Hi, I am new to recording. I am trying to find the best settings for my MXL R144 paired with a XENYX 802. I am using this primarily for recording violin. Right now, I am getting a muddy and scratchy sound from my mic. Any tips?
