Skip to main content

Phasing Issue

Hi Guys,

I've just installed 2 patchbays into my studio and I'm having some issues.

I have 1x MOTU 24 i/o
2x Behringer Ultrapatch Pro
1x Aphex Aural Exciter Type C2 with Big Bottom

The patch which is causing the trouble is 1&2 OUT from the MOTU, into the Exciter via the patchbaythen back the board via the patchbay.

How is this wide white noise made without ANY phasing at all it seems?

Here is an example of a wide white noise effect used in a track which seems to have no phase cancellation whatsoever. If you mono the sample the white noise shows zero phasing and sounds exactly the same in mono. Any idea's on how the hell this is done? All my attempts and techniques have left me with big wide sounds but with slight phasing.

phasing issues

I've set up a spare bedroom for recording electric guitar. I'm playing thru a Hughes and Kettner Switchblade 100W combo. I'm using a 3 mic technique. The first is a dynamic SM-57 placed about an inch from the grill cloth, midway between the center cone and the outer edge, pointing straight to the speaker.