Today I did a choir concert in the local community college auditorium. I used an ORTF setup with two RODE NT-2A microphones. I was back about 20 feet from the first row of the choir and up about 3 feet over heads of the singers in the back row. Pretty normal setup for us.

Okay I have my delta 1010LT sound card with my mic hooked up through the XLR plugs now the only problem is when I record it records mono not stereo apparently the sound card has two XLR plugs Mic 1 and Mic 2, Mic 1 records thru the right side Mic 2 the left dont know what the deal is is there any way I can config it to be stereo?

I am utterly baffled.
I have been trying to get some lavalier microphones to work with a standard mixer than accepts an XLR jack.
I have tried 2 different sets of mikes, and 2 different mixers, and I can't seem to get any sound out at all.

I recently received an SM57 and an M-Audio Fast Track which connects to my laptop via USB (and is thus powered through this connection). The Fast Track has a headphone jack on it with which I can hear either the laptop audio output or what I'm recording live, depending on the mixer knob setting.

So I am trying to set my friend up with a little home setup. He has a M-Audio fast track pro running into Sonar home studio.

Ok, we are trying to record clips of our band live with this

anyway we were trying to test it at home running keyboard lines to it (4, but weve had the same problem with 8 or 1 or whatever).

Whenever we try to record anything with it, it records for a few seconds (usually 2-12) and then it stops recording. then the bar continues (but it does not resume recording).

I dont know what to do?
When i'm recording my drums,i record also the midi,and i have a problem with latency!
I have my Ddrum 4 hoocket up with my EMU card through midi in and the latency is set to minimum 2ms and when i list it on the monitors there is no latency,but when i record the signal it records almost with a whole second of latency or something like that:0

I dont know what to do?
When i'm recording my drums,i record also the midi,and i have a problem with latency!
I have my Ddrum 4 hoocket up with my EMU card through midi in and the latency is set to minimum 2ms and when i list it on the monitors there is no latency,but when i record the signal it records almost with a whole second of latency or something like that:0

Anyone know why Adobe Audition will not allow me to select inputs 3-16 on my Tascam US-1641. I have set up the new Tascam unit but when I try to view my input selection in Audition, it only shows the Tascam unit as a whole. I can record using channels 1 and 2, and it will play back on the monitor outputs, but nothing else.

I just picked up an old Yamaha MIDI foot controller that I wanted to use with Ableton, but whenever I try to map an Ableton control to any of the buttons, they all come up as "pitchbend" as if each button is sending the exact same midi message. Nothing happens when I press a button I mapped either, despite Ableton still seeing the activity and allowing it to be mapped.