oh yea...the link is
http://www.myspace.com/mankeyfromcc

let me know what you think

sounds fine to me 8-)

Hey cool!...

Will tell us how you recorded the vocals?

What mike? How far you were from the mike?
What preamp?

How did you double the vocals (in some parts)?

"I spit so sick I make the mic throw up."

:lol:

This has to be a dynamic mic, right? You could stand to roll off a little bottom end. More higs end would give more presence. A good deal of conpression is also in order.

That line is nice. Yea I actually used a behringer b1 single diaphragm condensor mic. The rest of my signal chain is pretty cracker jack though. I used a Focusrite MBox as a preamp and not an interface. Why? My laptop only has 256mb and will not support monitoring while recording in 24bits through the usb bus. When I try to use an interface the rapper will complain about skipping like a cd. So I use the phantom power and the direct monitoring off the Mbox and run it straight to the mic in port on the stock laptop soundcard. I also use Adobe Audition to do the tracking and I'm about to use soundforge to compress the vocals. Now David, when you said compression, did you mean the beat, the vocals, or both together. Also, I have little to no experience with compression so if you could, give me a ratio to start off with and then i'll tweak it to get the sound that I want. I'm going to try what David suggested as far as eq and I'll post the new version. Thanks to all who posted.