Skip to main content

Hi all
I am aware of some of the discussion regarding power supply noise from the G5's (with digi 002R's, I think). I just bought a digi 002 R (today..!) (after using logic for a long time), and have encountered a similar problem with my 12' powerbook (40gig/640mb OSX 10.2.8). When I plug the power supply in - horrible noise..! I downloaded CHUD tools, and turned off Nap - which has helped - but its only bearable now... The digi 002r is going directly into my Mackie HR824's. Any suggestions anyone?
(I know the 12" powerbook is 'untested' according to Digidesign - the few shops I spoke to assured me the 002r will work fine with it).
Any help would be greatly appreciated! Many thanks. Aaron

Comments

anonymous Fri, 02/13/2004 - 06:29

I use my laptop with sonar to assist in mixdown. So I can take my tracks wherever and work on them. I find a problem when I have my computer plugged in to a wall outlet that I get a very annoying hum in my speaker system. To correct the problem I bought a ground lift adapter from the hardware store. Put that in between my powercord and the outlet and the hum was gone. I'm guessing that this is probably the problem with your system as well.

anonymous Mon, 02/16/2004 - 06:43

The device is basically a thing about an inch or so long. On one side is accepts a standard US three prong plug, however, instead of having three plugs on the other side it only has two. It bypasses the US standard ground circut on US power plugs. It's really a simple device. You can pick it up just about anywhere in the hardware department by the electrical cords generally.