anonymous
5 January 2005
i'm running Pro Tools with an mbox and i'm getting a delay through the playback like a split second. i know how to get rid of the delay in Sonar but i can't get it to go away with this Pro Tools. i also would like to know if it is possible to hook the Pro Tools to a Roland VS -2480 for interface to control levels with the faders. any knowledge would be appreciated.
Comments
Protools Delay with an MBox Hi ... I have a 002, so I don't kno
Protools Delay with an MBox
Hi ... I have a 002, so I don't know about your problem explicitly, but have you checked out the [="http://duc.digidesign.com"]Digi User Conference (DUC)[/]="http://duc.digidesi…"]Digi User Conference (DUC)[/] for help with your problem? I find the DUC to be friendly, informative, and full of people who know PT inside and out. Check it out ...
First impression of your problem: have you adjusted the hardware playback engine (samples and buffer) to the lowest settings that your system can handle? I know that the MBox does not have Low Latency Monitoring, but I am under the impression that you can tweak your system to make the latency negligible. As far as setting up your VS as a control surface, there is a current discussion on the DUC about this [[url=http://="http://duc.digidesi…"] here [/]="http://duc.digidesi…"] here [/].
Check out the DUC for help.