USB interface w/o preamps

anonymous 15 August 2009

I have been using a EMU 0404 USB interface for awhile now but I recently bought a PreSonus Studio Channel which has a sweet preamp in it. I no longer really need the EMU because I don't like stacking preamps but I will still need the USB connectivity.

Can someone show me the way to just a simple USB interface I can come out of my PreSonus into then go into the computer?

Thanks :)

Comments

Without spending significantly more money the EMU is your way in

TheJackAttack Sat, 08/15/2009 - 17:57

Without spending significantly more money the EMU is your way into the computer.

This dang thing sounds good but there is just too much hum/noise

anonymous Sat, 08/15/2009 - 20:40

This dang thing sounds good but there is just too much hum/noise with 2 preamps...

Is there not some cheap Edirol that works? [[url=http://[/URL]="

Codemonkey Sun, 08/16/2009 - 00:38

Is there not some cheap Edirol that works?
[[url=http://[/URL]="http://www.dv247.co…"]This[/]="http://www.dv247.co…"]This[/] doesn't have 1/4" inputs, hmm...

use balanced jack cables from presonus to emu set the input gain

anonymous Sun, 08/16/2009 - 00:42

use balanced jack cables from presonus to emu
set the input gain on the emu to 0

I actually tried several budget interfaces, and the emu has by far the best preamps, very clean / low noise / high gain

I figured it out. The gain on the EMU was what was causing the

anonymous Sun, 08/16/2009 - 20:45

I figured it out.

The gain on the EMU was what was causing the noise. The Studio Channel is super duper quiet compared to the EMU. I had the EMU gain at about 10 o'clock, which is hardly any, and it was too much noise. I just cranked the gain and output on the presonus and lowered the gain on the EMU.

Very little noise now and I just cranked out one sweeeet recording. Thanks for the input though guys :)

Ideally you would want the EMU set at Unity gain or 0dBv. This

TheJackAttack Sun, 08/16/2009 - 22:02

Ideally you would want the EMU set at Unity gain or 0dBv. This prevents noise being added by either amplification or from attenuation.

The liftin and loadin should be done with the Presonus as you found out.

Comments

Without spending significantly more money the EMU is your way in

This dang thing sounds good but there is just too much hum/noise

Is there not some cheap Edirol that works? [[url=http://[/URL]="

use balanced jack cables from presonus to emu set the input gain

I figured it out. The gain on the EMU was what was causing the

Ideally you would want the EMU set at Unity gain or 0dBv. This

User login

Popular content

Today's:

All time:

Last viewed: