Problems with recording at 192 with MOTU 192HD & CubaseS

anonymous 28 May 2005

Hey everyone, just got Cubase SX3 to run my studio, but I am having trouble switching the sample rate to 192 khz.

I'm using:
Cubase SX3
Dual Opteron 244 DAW
MOTU 192HD Interface
Mackie 1640 ONYX Mixing Board

No matter what I try or what I switch it to, Cubase always switches it back to 44khz. I can open up the MOTU control panel and switch the sample rate around all day long, but as soon as I open Cubase, it switches it to 44khz.

My clock source is set to PCI-424 (the pci card that the MOTU connects to), I'm using the MOTU ASIO driver, and the device is the 192HD.

I hope someone has experience with recording 192khz and can help.

If there's anything else I'm leaving out, please let me know.

Thanks
- Chris

Comments

Does cubase support 192khz? Just curious what are wanting to rec

anonymous Sun, 05/29/2005 - 21:56

Does cubase support 192khz? Just curious what are wanting to record at 192khz?

Rick

I'm using SX2, but aren't you supposed to switch the sample rate

gumplunger Sun, 05/29/2005 - 22:49

I'm using SX2, but aren't you supposed to switch the sample rate in the project setup? If you switch it outside of cubase and then enter cubase, it's going to switch to whatever cubase has in the project setup.

provided cubase sx 3 supports 192 kHz (i only have sl 1!), just

anonymous Sun, 05/29/2005 - 22:56

provided cubase sx 3 supports 192 kHz (i only have sl 1!), just change the sample rate in cubase project setup. make sure that your motu mixer don't have the rate locked at 44.1 first.

hope this helps some,
-eric.

Cubase will only let me go as high as 96khz in the project setti

anonymous Mon, 05/30/2005 - 12:37

Cubase will only let me go as high as 96khz in the project settings :/

Then Cubase SX3 doesn't support 192khz. Personally, I think 96k

gumplunger Mon, 05/30/2005 - 18:05

Then Cubase SX3 doesn't support 192khz.

Personally, I think 96khz is enough for just about anything, but that's just me.

You require Nuendo for 192k. And a large fast hard drive.

Reggie Mon, 05/30/2005 - 18:11

You require Nuendo for 192k. And a large fast hard drive.

Tags

Comments

Does cubase support 192khz? Just curious what are wanting to rec

I'm using SX2, but aren't you supposed to switch the sample rate

provided cubase sx 3 supports 192 kHz (i only have sl 1!), just

Cubase will only let me go as high as 96khz in the project setti

Then Cubase SX3 doesn't support 192khz. Personally, I think 96k

You require Nuendo for 192k. And a large fast hard drive.

User login

Popular content

Today's:

All time:

Last viewed: